topic Re: finding device from lbolt error in Operating System - HP-UX

finding device from lbolt error

sen_ux — Fri, 27 Feb 2009 23:25:28 GMT

Hi All,

How to find out the device name from the below error.

SCSI: Reset detected -- lbolt: 826720555, bus: 1
lbp->state: 4060
lbp->offset: ffffffff
lbp->uPhysScript: e007c000
From most recent interrupt:
ISTAT: 02, SIST0: 02, SIST1: 00, DSTAT: 80, DSPS: e007c028
lsp: 0000000000000000
lbp->owner: 0000000000000000
scratch_lsp: 0000000000000000
Pre-DSP script dump [fffffff4a007c0e0]:
e0340004 00000000 e0100004 00000000
48000000 00000000 78350000 00000000
Script dump [fffffff4a007c100]:
50000000 e007c028 80000000 0000000b
0f000001 e007c5c0 60000040 00000000

Thanks
sen

Re: finding device from lbolt error

Vinoyee Madashery Poulo — Mon, 02 Mar 2009 12:05:39 GMT

execute dmesg and you may find the minor number for this device then check /dev/dsk directory.

Re: finding device from lbolt error

Shahul — Mon, 02 Mar 2009 12:11:51 GMT

Hi,

Check for EMS alert in syslog.log, there will be a command line entry in the error message, if you execute that, it will give you the hardware path.

Good Luck
Shahul

Re: finding device from lbolt error

likid0 — Mon, 02 Mar 2009 12:13:15 GMT

Have a look ant this thread:

http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1211479277623+28353475&threadId=956715