topic sudo on v3 in Operating System - HP-UX

sudo on v3

DeafFrog — Mon, 02 Mar 2009 06:49:30 GMT

Hi !

I am installing sudo , and getting this error ......Could not start a management session for
"sudo-1.7.0-ia64-11.31.depot[1]:/var/spool/sw" due to an internal
Remote Procedure Call binding failure. The calling routine is
"IC_SourceGet".I have downloaded from porting and archiving site. it's hpv3 and as i can recall i might have read some where that in v3 instead of having various rpc daemon (statd,lockd,mountd..etc) there will be only one rpc daemon ...i have tried installing on various v3 machine, same error ...perhaps some option in /var/adm/sw/defaults ..any idea ?

Re: sudo on v3

Duncan Edmonstone — Mon, 02 Mar 2009 06:58:34 GMT

Get sudo direct from HP. It's in the Internet Express collection available here:

http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPUXIEXP1131

Do you have a particular reason for using sudo rather than the built-in RBAC:

http://docs.hp.com/en/5991-8678/ch03.html

HTH

Duncan

Re: sudo on v3

Asif Sharif — Mon, 02 Mar 2009 07:32:40 GMT

Hi DearFrog,

I downloaded from porting and archiving site and its working fine with my case, Please check you downloaded for the right platform. PA-RISC or Integrity.

http://hpux.connect.org.uk/hppd/hpux/Sysadmin/sudo-1.7.0/

Or you can try it from HP link.

Regards,
Asif Sharif

Re: sudo on v3

DeafFrog — Mon, 02 Mar 2009 08:55:31 GMT

Thanks Duncan and Asif ,
I think RBAC will do what i need , i need to get used to it .Thanks once again.