topic Re: mounting disk from hpux 11.00 to hpux 11.31 in Operating System - HP-UX

mounting disk from hpux 11.00 to hpux 11.31

yulianto piyut — Tue, 17 Mar 2009 13:30:39 GMT

hi all,

i have a problem when mounting disk from hp-ux 11.00 to hp-ux 11.31. I have migrated data with source data mounted on hp-ux 11.00 and i want to mount these new disks to hp-ux 11.31. an error when mounting is :
# mount /dev/vgdata5/lvol1 /data13
vxfs mount: V-3-21270: /dev/vgdata5/lvol1 disk image is incompatible with this system
# model
ia64 hp server rx6600
# uname -a
HP-UX mrsapdb2 B.11.31 U ia64 0753343482 unlimited-user license
# fstyp -v /dev/vgdata5/lvol1
vxfs
version: 3
f_bsize: 8192
f_frsize: 8192
f_blocks: 32759808
f_bfree: 4102537
f_bavail: 4102537
f_files: 1073899336
f_ffree: 1073761352
f_favail: 1073761352
f_fsid: 1074135041
f_basetype: vxfs
f_namemax: 254
f_magic: a501fcf5
f_featurebits: 0
f_flag: 16
f_fsindex: 10
f_size: 32759808
#

Re: mounting disk from hpux 11.00 to hpux 11.31

James R. Ferguson — Tue, 17 Mar 2009 13:38:57 GMT

Hi:

Your VxFS layout version is <3> and your 11.31 supports only version <4> or later. If you have JFS 3.3 on your 11.0 server, upgrade there to version <4>.

Regards!

...JRF...

Re: mounting disk from hpux 11.00 to hpux 11.31

yulianto piyut — Tue, 17 Mar 2009 13:45:08 GMT

is it what you mean ?

# swlist |grep -i jfs
PHKL_24011 1.0 JFS 3.3 fix panic due to FS corruption
PHKL_24014 1.0 JFS 3.1 cummulative corruption and panic fix

and how to upgrade?

Re: mounting disk from hpux 11.00 to hpux 11.31

Avinash20 — Tue, 17 Mar 2009 13:48:58 GMT

If any VxFS file system with disk layout version 2 or version 3 has been created, these file systems cannot be mounted under VxFS 4.1 on HP-UX 11i v3. Please use the vxfsconvert command to upgrade the disk layout to version 4

Re: mounting disk from hpux 11.00 to hpux 11.31

Avinash20 — Tue, 17 Mar 2009 13:51:11 GMT

Please refer to

http://h20338.www2.hp.com/hpux11i/cache/602392-0-0-225-121.html?jumpid=reg_R1002_USEN

Under "Updating VxFS"

Re: mounting disk from hpux 11.00 to hpux 11.31

James R. Ferguson — Tue, 17 Mar 2009 13:52:13 GMT

Hi (again):

If you want to mount this filesystem on both 11.0 and 11.31 you need to have JFS 3.3 on your 11.0 server. Luckily, you can download it from:

http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B8861E

You use 'vxupgrade' to perform the layout uplift. See the manpages for details. This only requires a small amount of free space in the filesystem and only takes a few seconds to perform.

Regards!

...JRF...

Re: mounting disk from hpux 11.00 to hpux 11.31

Sharma Sanjeev — Tue, 17 Mar 2009 13:52:50 GMT

Hi

How to upgrade, Please have a look at below link

http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1237301520229+28353475&threadId=39308

Regards
Sanjeev

Re: mounting disk from hpux 11.00 to hpux 11.31

yulianto piyut — Tue, 17 Mar 2009 14:53:16 GMT

thx all,

is it need the license of vxvm? i have no online jfs installed and no license of vxvm

vxlicense -p
vrts:vxlicense: ERROR: No licenses installed
swlist |grep -i online
OnlineDiag B.11.11.15.13 HPUX 11.11 Support Tools Bundle, Dec 2004

Re: mounting disk from hpux 11.00 to hpux 11.31

James R. Ferguson — Tue, 17 Mar 2009 15:01:12 GMT

Hi (again):

> OnlineDiag B.11.11.15.13 HPUX 11.11 Support Tools Bundle, Dec 2004

Is this server 11.11 or 11.0 as your opening remarks and subject line would say?

Regards!

...JRF...