topic Re: Using evaperf on HPUX v3, EVA6100 in Operating System - HP-UX

Using evaperf on HPUX v3, EVA6100

PatRoy — Tue, 07 Apr 2009 16:50:41 GMT

Hi. I need to do some speed test with out EVA6100 from HPUX 11.31. Been told about evaperf.

Does anyone know where to get this, and know of a URL that will explain how to use this tool?

Thanks. PAt

Re: Using evaperf on HPUX v3, EVA6100

Jeff Schussele — Tue, 07 Apr 2009 17:43:54 GMT

Try here:

javascript&colon;openExternal('http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locBasepartNum=co-30754-1〈=English')

Jeff

Re: Using evaperf on HPUX v3, EVA6100

PatRoy — Tue, 07 Apr 2009 17:45:35 GMT

Im getting "The page you requested can not be found." :(

Re: Using evaperf on HPUX v3, EVA6100

smatador — Tue, 07 Apr 2009 17:48:17 GMT

Hi,
Evaperf is part of CV, look this docs
http://h71028.www7.hp.com/ERC/downloads/5983-1674EN.pdf?jumpid=reg_R1002_USEN
Hope this helps

Re: Using evaperf on HPUX v3, EVA6100

Jeff Schussele — Tue, 07 Apr 2009 17:48:27 GMT

Yep - sorry I should have checked.
Let me troll around further.

Jeff

Re: Using evaperf on HPUX v3, EVA6100

Jeff Schussele — Tue, 07 Apr 2009 18:01:03 GMT

Hey PatRoy (Watch that left HAnd CAp :%)),

Here's the URL for the manual.
I suspect that if this is a "pay-for-use" product then you'll need to contact your HP Rep.
Else everything's available on software.hp.com.
Just search judiciously.
Try this;

http://h71028.www7.hp.com/ERC/downloads/5983-1674EN.pdf?jumpid=reg_R1002_USEN

Good Luck,
Jeff

Re: Using evaperf on HPUX v3, EVA6100

PatRoy — Tue, 07 Apr 2009 18:17:18 GMT

Thanks Jeff ;)

I've printed out the white papers... thanks! But where do I get the actual binary to run on hpux 11.31 (v3)

The PDF leads me to
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=471498&prodTypeId=12169&prodSeriesId=471497&swLang=13&taskId=135&swEnvOID=7

But that only seems to have the v1, v2 version... ??

Re: Using evaperf on HPUX v3, EVA6100

smatador — Tue, 07 Apr 2009 19:23:45 GMT

Hi,
Install cv on windows, you will get the evaperf. You should interact with the windows cv to you hpux 11.31 box
Look at the releases notes
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=471497&swItem=co-64828-1&prodNameId=3664268&swEnvOID=1005&swLang=13&taskId=135&mode=4&idx=0