topic Re: CDE is not coming up on J5000 in Operating System - HP-UX

CDE is not coming up on J5000

Technical Support_2 — Fri, 02 Nov 2001 15:32:30 GMT

Hi
System is up and running except CDE.
/etc/rc.log says
Start CDE login server
Output from "/sbin/rc3.d/S990dtlogin.rc start":
----------------------------

permission on files are ok
-r--r--r-- 1 bin bin 616 Jul 1 16:03 /etc/hosts
-r--r--r-- 1 root sys 1010 Jun 25 18:22 /var/adm/inetd.sec

Name resolv is working fine.
ip to name is working fine. I can ping both way.

/var/dt/Xerror has this
more /var/dt/Xerrors
Fri Nov 2 09:07:58 2001
info (pid 2565): Rebuilding default language list from /usr/lib/nls/

Fri Nov 2 09:07:58 2001
info (pid 2565): Rescanning both config and servers files

/var/adm/inetd.sec. contains
dtspc allow 127.0.0.1
spc allow 127.0.0.1
mserve allow 127.0.0.1

dr_st reports two warning.
WARNING: /usr/dt/bin/xmbind does not exist. It needs
to be on the system in order for HP CDE to run properly.
There may have been a problem at installation. You
can either reinstall HP CDE or get a copy of the file
from another compatible system.

WARNING: /usr/dt/bin/suid_exec does not exist. It needs
to be on the system in order for HP CDE to run properly.
There may have been a problem at installation. You
can either reinstall HP CDE or get a copy of the file
from another compatible system.

Two dt processes are running
ps -ef |grep dt
root 2565 2544 0 09:07:56 ? 0:00 /usr/dt/bin/dtlogin
root 2544 1 0 09:07:56 ? 0:00 /usr/dt/bin/dtrc /usr/dt/bin/dtrc
root 5400 3063 0 09:32:10 pts/0 0:00 grep dt

No X process is runing
ps -ef |grep X returns empty

Changes: we replace graphics card bring by HP. same model.

Sachin

Re: CDE is not coming up on J5000

Alex Glennie — Fri, 02 Nov 2001 15:46:37 GMT

Ignore the 2 dr_dt errors .... not relevant but if you've changed the graphics card try this ->

rmsf /dev/*crt*
insf -evd framebuf

reboot or bring back to run-level 3

also I'd try to isolate why X isn't running, if the above doesn't work try init 2 and then run /usr/bin/X11/X :0 any errors ?

Re: CDE is not coming up on J5000

S.K. Chan — Fri, 02 Nov 2001 15:52:56 GMT

Attached is the CDE tshoot guide..

hope it helps..

Re: CDE is not coming up on J5000

harry d brown jr — Fri, 02 Nov 2001 15:59:16 GMT

Check for patches:

11. dr_dt is checking for /usr/dt/bin/suid_exec and
xmbind which do not load.

Resolution:
The dr_dt utility has been fixed so that the search
for suid_exec will not be done as it is not delivered
and search for xmbind would be done at the correct
location.

http://us-support.external.hp.com/wpsl/bin/doc.pl/screen=wpslDisplayPatch/sid=aa6eae0e0c626d46e1?PACH_NAM=PHSS_25138

live free or die
harry

Re: CDE is not coming up on J5000

Sachin Patel — Fri, 02 Nov 2001 16:29:34 GMT

Hi Alex,
I did that already forget to type.
I have pull up your thread and

Sachin

Re: CDE is not coming up on J5000

Sachin Patel — Fri, 02 Nov 2001 16:31:10 GMT

Hi Alex,
I was reading your thread
http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x0990e7613948d5118fef0090279cd0f9,00.html

did everthing what you have mention

Still trying.

Sachin

Re: CDE is not coming up on J5000

Alex Glennie — Fri, 02 Nov 2001 16:36:23 GMT

What about running sam and checking the Xserver/graphics card is enabled under DISPLAY->XserverConfig->add screen to config ? or checking in the /etc/X11/X0.screens file it adds up to the same thing ?

Does running X: 0 give us any clues/errors ?

I'd be surprised if the graphics setup is being stored and not released in the ioconfig files and don't like advising people to mv the copies in /stand and /etc unless I've ran out of all other ideas .....

Re: CDE is not coming up on J5000

Alex Glennie — Fri, 02 Nov 2001 16:40:59 GMT

I *think* this is X related nothing to do with CDE .... most likely device files or Xserver configuration ....I've just read my old post and that covers CDE issues ... have you tried my suggestions wrt rmsf/insf and also the Xserver/sam config yet ? results ?

Re: CDE is not coming up on J5000

Sachin Patel — Fri, 02 Nov 2001 16:47:03 GMT

Cool X man

While I was reading your thread and talking to HP. In file /etc/dt/config/Xserver I found this line in comment
# * Local local@console /usr/bin/X11/X :0

Ask HP guy because I was reading your other thread and saw that this line needs to be uncommented.

Everthing is working fine now.

Thakns
Sachin Patel

Re: CDE is not coming up on J5000

Alex Glennie — Fri, 02 Nov 2001 16:52:58 GMT

That'd throw a spanner in the works ..... tells X to start locally on your local dispaly

what I can't figure is if it was working how or who put the # in front of the * local line .... guess the give away was CDE was runing but not X and me jumping to conclusions re the change of graphics cards .....doh !

Been busy this last hour had quite a of X related questions on the forums and in the UKRC comming through so my excuse is I can't multi task too well ;) Time for a coffee and a smoke I think ;) or get me a JRF clone ;)

Re: CDE is not coming up on J5000

Technical Support_2 — Fri, 02 Nov 2001 17:04:00 GMT

Most probable. It happens automatic because we had console far far from system (i.e using extension cable) and yesterday they move monitor one door down. Display didn't comeup and so guy called hp and ask for new graphics card. HP replace graphics card. But may be because video signal wasn't strong enough it did disable that line and boot the system to level 3.
Today someone use sorter monitor cable and hook monitor. but because of disable line it never comeup to CDE.

Then they ask me to fix it ASAP.

Sachin