topic Re: Vpar in Operating System - HP-UX

Vpar

Rg_4 — Sun, 31 May 2009 12:31:09 GMT

1.What is the command to halt and TOC a vpar?
2.Which command is used to load all the virtual partitions?
3.How to backup a vpar?

Re: Vpar

Steven E. Protter — Sun, 31 May 2009 12:47:38 GMT

Shalom,

http://docs.hp.com/en/T1335-90092/ch05s09.html

http://docs.hp.com/en/T1335-90012/ch02s01.html

http://docs.hp.com/en/T1335-90098/ch11s07.html

3. You use Ignite make_net_recovery or make_tape_recovery same as a regular system to back up the OS.

SEP

Re: Vpar

Sajjad Sahir — Sun, 31 May 2009 13:32:47 GMT

Dear Friend

please see the link

http://portal.acm.org/citation.cfm?id=560386

thanks and regards

Sajjad Sahir

Re: Vpar

Sajjad Sahir — Sun, 31 May 2009 13:40:20 GMT

Dear Rageesh

Please the document related to npar and vpar
it will give u sound idea regarding partions
http://docs.hp.com/en/6018/T1335-90031.pdf

thanks and regards

Sajjad Sahir

Re: Vpar

Basheer_2 — Mon, 01 Jun 2009 04:17:06 GMT

Dear Rajesh.

1.What is the command to halt and TOC a vpar?
To halt r3portal from a running vpar. login into the running vpar.

vparreset -p r3portal â h

to toc
login to a running partition.
vparreset -p r3portal -t

2.Which command is used to load all the virtual partitions?
The first npar is also is your first vpar.
then you need to set the mode to tell if its npar mode or vpar mode.

so if you set the mode to npar, then you don't have vpar running.

If your mode is vpar mode, then this will load the vpars.
ISL> hpux /stand/vpmon
MON> vparload -p r3portal

3.How to backup a vpar?
in our case (usually this is the way it should be) each vpar has 2 disks. so we mirror the primary disk to the 2nd one.

If you mean backing up the OS, we ignite this to an ignite server.