topic Re: Need script for HP-UX in Operating System - HP-UX

Need script for HP-UX

GPrakash — Thu, 11 Jun 2009 09:33:17 GMT

Hi folks,

Small help.

Iam writing script to findout Swap size, dumpsize, NIC duplex,ssh package installed or not with version.

If anyone has ready made script or giving suggestions will be helpful for me.

thanks in advance.

-prakash

Re: Need script for HP-UX

James R. Ferguson — Thu, 11 Jun 2009 09:42:09 GMT

Hi:

# print_manifest

...which when you make an Ignite recovery backup is snapped automatically.

Regards!

...JRF...

Re: Need script for HP-UX

GPrakash — Thu, 11 Jun 2009 09:55:50 GMT

Hi

I need to write script with HP-UX commands, I do not want to use other tools, ignite-UX.

can you suggest on scripting?

Re: Need script for HP-UX

smatador — Thu, 11 Jun 2009 10:05:31 GMT

Hi,
In fact print_manifest or cfg2html and other tools like that permit to have systeme info like you are asking. Look in them, test them and after that, why not take the command in the script.
Hope it helps

Re: Need script for HP-UX

Suraj K Sankari — Thu, 11 Jun 2009 10:12:00 GMT

Hi,

Run nickel script to know all the above details.

Suraj

Re: Need script for HP-UX

GPrakash — Thu, 11 Jun 2009 11:29:31 GMT

Hi Folks,
thanks for your suggestions, actually we are writing script to put keep in Bladelogic tool.

for that we are writing scripts.

thanks

Re: Need script for HP-UX

Rick Garland — Thu, 11 Jun 2009 12:55:08 GMT

The print_manifest, cfg2html, nickel, sysinfo, etc are all comprosed of HPUX commands as this is how they query the system to gather the info. Look into thse utilities and see the commands and how they are used for your examples. If you want to reinvent the wheel, have at it.

Re: Need script for HP-UX

George Denyer_1 — Thu, 11 Jun 2009 16:58:51 GMT

Other than print_manifest and the like you would probably have to use commands like swapinfo, lanscan/lanadmin, swlist, etc and pipe their output into awk to pick out what you need.

Re: Need script for HP-UX

Michal Kapalka (mikap) — Thu, 11 Jun 2009 17:42:10 GMT

hi,

install SysInfo.

this tool collect everithing from your system.

output can be text file or html.

mikap

PS : i'm using it on all systems, to collect all information.

Re: Need script for HP-UX

Michal Kapalka (mikap) — Thu, 11 Jun 2009 17:44:50 GMT

hi,

home page of SysInfo.

http://www.magnicomp.com/sysinfo/

mikap

Re: Need script for HP-UX

Bill Hassell — Thu, 11 Jun 2009 23:19:07 GMT

> Hi folks,

Small help.

Iam writing script to findout Swap size, dumpsize, NIC duplex,ssh package installed or not with version.

- swapsize is found using the command: swapinfo -tam

- dumpsize -- not clear. Do you mean: what is the size of the last crash dump? Or the amount of freespace in the /var/adm/crash directory? Or the size of the raw dump lvols?

- NIC duplex is found with: lanadmin -x 12 (where 12 is is replaced with each of your LAN card PPA numbers)

- ssh - run the command:

ssh -V