topic Re: SG in Operating System - HP-UX

SG

Rg_4 — Thu, 11 Jun 2009 09:58:59 GMT

How will you configure SG 2 node cluster

Suraj K Sankari — Thu, 11 Jun 2009 10:10:16 GMT

sujit kumar singh — Thu, 11 Jun 2009 10:15:48 GMT

hI

if you are doing this on HP-UX11iv3 then this is a small good document.

http://thomasvogt.wordpress.com/2008/08/26/mcserviceguard-cluster-installation-on-hp-ux-1131/

regards
sujit

Michal Kapalka (mikap) — Thu, 11 Jun 2009 10:16:51 GMT

hi,

you should read documentation from HP,

advice from "Suraj K Sankari" but you could

look on this blog, there is a step-by-step how

to configure a SG on HP-UX 11.31

http://thomasvogt.wordpress.com/2008/08/26/mcserviceguard-cluster-installation-on-hp-ux-1131/

mikap