topic Re: eavinfo vs ioscan in Operating System - HP-UX

eavinfo vs ioscan

bouserg_1 — Fri, 12 Jun 2009 16:52:44 GMT

Hi,

I have discovered a strange pb:
with ioscan i can see all the luns created in the eva4400.(88 disks)
But with command "evainfo -a" i can't see all of them.(only 4 disks)

br

Re: eavinfo vs ioscan

bouserg_1 — Fri, 12 Jun 2009 16:56:40 GMT

the OS version hp-ux 11.23 IA
the evainfo version: 7.0

Re: eavinfo vs ioscan

Patrick Wallek — Fri, 12 Jun 2009 17:10:19 GMT

>>ioscan i can see all the luns created in the eva4400.(88 disks)

How many LUNs do you actually have on the EVA? How many of the devices returned by ioscan are actually alternate paths to the same LUN?

Re: eavinfo vs ioscan

sujit kumar singh — Fri, 12 Jun 2009 17:43:15 GMT

Hi As pointed out by Patrick can you post the O/Ps for evainfo as well as ioscan -fnCdisk as well as ioscan -fn and ioscan -fnC ext_bus
regards
sujit

Re: eavinfo vs ioscan

bouserg_1 — Fri, 12 Jun 2009 18:01:07 GMT

I've 11 vdisks created in the eva .
with 8 pvlink i have 88 devices seen with ioscan.the volume group are created in hpux and all goes fine.

But when i do evainfo , it shows me only 4 device disks.
I think that i have a problem with evainfo

Regards

Re: eavinfo vs ioscan

Basheer_2 — Sat, 13 Jun 2009 07:10:44 GMT

Mine shows same with ioscan and evainfo.

check the evainfo version.

Re: eavinfo vs ioscan

bouserg_1 — Mon, 15 Jun 2009 09:33:27 GMT

Hi,

EVAInfo v0.4_070103