topic errors in rc.log in Operating System - HP-UX

errors in rc.log

DeafFrog — Tue, 30 Jun 2009 11:00:02 GMT

Dear Gurus,

I saw some errors in rc.log .........
Start multicast routing daemon
Output from "/sbin/rc2.d/S490mrouted start":
----------------------------
/sbin/rc2.d/S490mrouted[39]: Syntax error at line 4 : `(' is not expected.

Start Internet services daemon
Output from "/sbin/rc2.d/S500inetd start":
----------------------------
/sbin/rc2.d/S500inetd[38]: Syntax error at line 4 : `(' is not expected.

Start dynamic routing daemon
Output from "/sbin/rc2.d/S510gated start":
----------------------------
/sbin/rc2.d/S510gated[38]: Syntax error at line 4 : `(' is not expected.

after i had restored the box with ignite tape.
also the inetd is not coing up ..
# /sbin/init.d/inetd start
/sbin/init.d/inetd[38]: Syntax error at line 4 : `(' is not expected.
#
could you please suggest what i can check for ......
Regards ,
Rahul

Re: errors in rc.log

James R. Ferguson — Tue, 30 Jun 2009 11:06:51 GMT

Hi:

You probably have a bogus file in the '/etc/rc.config.d' directory. You can keep backup copies of files here _ONLY_ if you follow the rules documented in '/etc/rc.config'.

One way to expose the problem is to do:

# sh -vx /etc/rc.config 2>&1|more

The actual filename will appear as 'fname=' in the traced output with clear syntax errors like you have seen.

Regards!

...JRF...

Re: errors in rc.log

DeafFrog — Tue, 30 Jun 2009 12:36:17 GMT

Dear James ,

Removed the bogus entry and rebooted.now OK.You are fantastic !!

Thanks a lot once again.