topic Re: Adding a printer model script in Operating System - HP-UX

Adding a printer model script

Eric Bakken — Mon, 03 Aug 2009 18:57:44 GMT

Hello All,

I've just replaced an old server that was using printer model script net_lj4x. Do you know where I can get that for the new server?

Thanks,

-Eric Bakken

Re: Adding a printer model script

Tim Nelson — Mon, 03 Aug 2009 19:00:52 GMT

It is probably already on your new server.

look in /usr/lib/lp/model/

Just about all the laserjet models are the same...

Re: Adding a printer model script

Eric Bakken — Mon, 03 Aug 2009 19:19:05 GMT

I found it under /opt/hpnpl/sh/net_lj4x

I wonder why it's not showing up in my list while adding a printer?

Re: Adding a printer model script

Tim Nelson — Mon, 03 Aug 2009 19:23:18 GMT

if you execute

addqueue -l

it will list the model scripts registered with the jetdirect printer util..

You can always add the printer with any model and then just copy the model script you like to /etc/lp/interface/PRINTER_NAME

Re: Adding a printer model script

Eric Bakken — Mon, 03 Aug 2009 19:41:01 GMT

It was in the list I just wasn't looking in the right place. It's working now. Thanks for the help,

-Eric