topic Re: Hi experts in Operating System - HP-UX

Hi experts

fizan — Mon, 07 Sep 2009 05:52:30 GMT

I got a brand new hp server, how to bring it up the server and assign ip and take the remote desktop login.. can u explain the steps experts..

Thanks.

Re: Hi experts

Torsten. — Mon, 07 Sep 2009 06:04:23 GMT

With an OS factory installed the system will run a "wizard" asking you for IP address, server name, etc ...

If you want to do this again later, run

# set_parms initial

Re: Hi experts

fizan — Mon, 07 Sep 2009 06:10:32 GMT

actually my hp server model -2660
and the version am going to install is 11i. and can i know as the factory default wat version of os will be installed ? and how to migrate from tat version to 11i

Re: Hi experts

Torsten. — Mon, 07 Sep 2009 06:16:50 GMT

All versions are 11i, but

11iv2 11.12
or
11iv3 11.31

It depends on what you have ordered.

Re: Hi experts

fizan — Mon, 07 Sep 2009 06:55:13 GMT

we have just ordered for 2660 tortsen

Re: Hi experts

melvyn burnard — Mon, 07 Sep 2009 08:03:17 GMT

It would be far better to have a relevant subject instead of "Hi experts" !!

And if you havejust ordered th server, then as part of your order you should have chosen the HP-UX version.
If not, then by default I think it is now 11iv3, and when you first boot it it will run through the set_parms scrip to allow you to set those parameters, UNLESS you ordere it without a factory OS install.
In that case, once you install the OS, there are options at install time to set all of those, or if you do not do that, then the first time it boots it will still run set_parms .