topic Re: ignite backup in Operating System - HP-UX

ignite backup

madhudeepan — Tue, 06 Oct 2009 05:16:29 GMT

ver 11iv3 server model - itanium RX 8640

one of the vpar has been configured as ignite server.

i have stopped nfs client in client server with
/sbin/init.d/nfs.client stop and in
/etc/rc.config.d/nfsconf client has been set to 0.

but now also I am able to run ignite backup.

Re: ignite backup

Sagar Sirdesai — Tue, 06 Oct 2009 05:57:38 GMT

Please post the error you're getting

Sagar

Re: ignite backup

Suraj K Sankari — Tue, 06 Oct 2009 05:57:44 GMT

Hi,
Check properly in which server you stopped nfs.

what is the problem why you want to stop ignite backup?

suraj

Re: ignite backup

Gokul Chandola — Tue, 06 Oct 2009 09:00:32 GMT

Hi,
Within the same system, there is no meaning of Ignite Server.

In this case,there is configuration issue only.

Regards,
Gokul Chandola

Re: ignite backup

madhudeepan — Tue, 06 Oct 2009 09:18:19 GMT

consider host A configured as ignite server. host B as client.

I am not getting any error & i dont have any issues when running make_net_recovery cmd..

make_net_recovery -IvA -s [host server] -x inc_entire=vg00 -a [path] [ client host ]

but my doubt is even though i stopped nfs client in client host ,, i am able to take ignite backup

is there any dependency between client and server on the basis of stopping or starting nfs while running ignite backup