topic Re: NTP in Operating System - HP-UX

NTP

kunjuttan — Tue, 29 Dec 2009 07:26:48 GMT

How to setup a local NTP server?

Re: NTP

Sunny123_1 — Tue, 29 Dec 2009 07:30:30 GMT

Hi

Please refer below document

http://docs.hp.com/en/B2355-90147/ch07.html

Regards
Sunny

Re: NTP

SoorajCleris — Tue, 29 Dec 2009 07:32:02 GMT

Hi,

Which NTP server you want to configure?

1. which Stratum?

Regarsds,
Sooraj

Re: NTP

SoorajCleris — Tue, 29 Dec 2009 07:32:39 GMT

If you want to configure an NTP server to use its own system clock as an authoritative time source, add
the following lines to the server's /etc/ntp.conf file:
server 127.127.1.1 prefer
fudge 127.127.1.1 stratum 10
broadcast 128.1.255.255

Regards,
Sooraj

Re: NTP

sarfaraj ahmad — Tue, 29 Dec 2009 11:43:21 GMT

Hi,
please find the Local NTP server and NTP Client Configuration procedure as below,

Server Side Configuration:
**************************
Open the below file and modify the below lines as below,
vi /etc/rc.config.d/netdaemons

export INETD=1

NTPDATE_SERVER=
export XNTPD=1
export XNTPD_ARGS=

Now open below file and modify,

# vi /etc/ntp.conf

server 127.127.1.1
fudge 127.127.1.1 stratum=10
broadcast

now start the ntp service.

# /sbin/init.d/xntpd start

check the status that server is synchronizing locally through below command.

#ntpq -p

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Client Side Configuration:
*************************

vi /etc/rc.config.d/netdaemons

export INETD=1

export NTPDATE_SERVER=" "
export XNTPD=1

vi /etc/ntp.conf
server prefer
server

start the ntp service.

# /sbin/init.d/xntpd start

now check that client is synchrozing with primary NTP server which IP you have mentioned in netdaemon/ntp.conf

#ntpq -p

Thanks
Sarfaraj

Re: NTP

kunjuttan — Thu, 31 Dec 2009 06:44:12 GMT

Thank you very much Mr.Sarfaraj Ahmad