topic Re: processor in Operating System - HP-UX

processor

Tarek — Thu, 15 Nov 2001 15:27:56 GMT

Hi,
is there a command on hp that tells me something about the processors, as how many processors has the ws and its frequence.
Is there also a command that tells everything about hardware configuration of the ws? (so not only processor?)
Thanks in advance
Tarek

Re: processor

Uday_S_Ankolekar — Thu, 15 Nov 2001 15:40:06 GMT

Hi,

top will you give you the detial of cpu process. Also download sysinfo.sh from hp porting website , that gives all the *required* information about a system
http://hpux.cs.utah.edu/hppd/

goodluck,
-USA..

Re: processor

Sanjay_6 — Thu, 15 Nov 2001 15:40:46 GMT

Hi Tarek,

you can use "stm" which is part of the OnlineDiag package available from your support plus CD.

You can also download the same from this link,

http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/displayProductInfo.pl?productNumber=B6191AAE

Here is the link to support plus user guide,

http://docs.hp.com/hpux/onlinedocs/5969-4302/5969-4302.html

Hope this helps.

Regds

Re: processor

Marcin Wicinski — Thu, 15 Nov 2001 15:42:01 GMT

Hi,
the best way to find out everything about harware is to install STM and use it as follows:

cstm -> sall ->info -> il -> v

You will get information on hardware configuration (mamory, processors, converters ...) and other connected devices: SCSI arrays ....

later,

Re: processor

Christopher Caldwell — Thu, 15 Nov 2001 15:45:19 GMT

cstm is hardware dependent (different answers for different hardware) but you can get some information:

# cstm
Running Command File (/usr/sbin/stm/ui/config/.stmrc).

-- Information --
Support Tools Manager

Version A.28.00

Product Number B4708AA

(C) Copyright Hewlett Packard Co. 1995-2001
All Rights Reserved

Use of this program is subject to the licensing restrictions described
in "Help-->On Version". HP shall not be liable for any damages resulting
from misuse or unauthorized use of this program.

cstm>scl type processor
cstm>info
-- Updating Map --
Updating Map...
cstm>infolog

You can use adb to get clock speed
echo itick_per_usec/D | adb /stand/vmunix /dev/kmem

Re: processor

G. Vrijhoeven — Thu, 15 Nov 2001 15:46:12 GMT

Hi,

stm, cstm should do the trik but if you did not install it information about other hardware(non CPU) can be found by ioscan -fn | more, dmesg, or in a reboot (not ideal)

Gideon

Re: processor

A. Clay Stephenson — Thu, 15 Nov 2001 15:47:08 GMT

Hi:

About as good as it gets is to install and run stm. (Support Tools Manager). If you have an X environment then you can run xstm and get a nice GUI.

Re: processor

Tarek — Thu, 15 Nov 2001 15:56:50 GMT

Thanks all. I'm downloadin STM, once done i will follow your tips. If i have problems on using it i will disturb you again ;-)
Thanks
Tarek

Re: processor

Tarek — Thu, 15 Nov 2001 16:46:54 GMT

cstm>scl type processor
cstm>info
-- Updating Map --
Updating Map...
cstm>infolog

You can use adb to get clock speed
echo itick_per_usec/D | adb /stand/vmunix /dev/kmem

Output is: 400
What does it mean? 440 mhz??
V model.

Re: processor

Sanjay_6 — Thu, 15 Nov 2001 16:55:40 GMT

Hi Tarek,

If the output of the command is 400, it means the processor speed is 400MHz and not 440MHz as posted by you.

Hope this helps.

Regds

Re: processor

Tarek — Thu, 15 Nov 2001 16:59:59 GMT

You're right Sanjay, it was an error typing ;-)
Thanks
Tarek