topic Re: What commands show all kernal parameters and values? in Operating System - HP-UX

What commands show all kernal parameters and values?

Gino Castoldi_2 — Thu, 15 Nov 2001 19:14:56 GMT

Hi,

Server: HP-UX 11.0 L2000

What command(s) list all kernal parameters and their values? (I known I can use SAM but I prefer to use the command line).

(10 points to any good answer).
Thank you Gino Castoldi

Re: What commands show all kernal parameters and values?

James R. Ferguson — Thu, 15 Nov 2001 19:17:01 GMT

Hi:

On 11.x, use 'kmtune':

# kmtune -l

Regards!

...JRF...

Re: What commands show all kernal parameters and values?

John Bolene — Thu, 15 Nov 2001 19:19:19 GMT

On 10.20 you can cat /stand/system to see stuff that is different from default.
It also shows all the device drivers that are included.

Re: What commands show all kernal parameters and values?

A. Clay Stephenson — Thu, 15 Nov 2001 19:21:24 GMT

kmtune or sysdef can be used.

Also:

echo '*system_data/s' | adb -k /stand/vmunix /dev/kmem

Re: What commands show all kernal parameters and values?

Sanjay_6 — Thu, 15 Nov 2001 19:21:44 GMT

Hi Gino,

Use

kmtune -S /stand/system

Hope this helps.

Regds

Re: What commands show all kernal parameters and values?

Thierry Poels_1 — Thu, 15 Nov 2001 19:22:33 GMT

Hi,

James already mentioned kmtune, so all I can add is the printout from within sam; which is still my favourite. Pitty there is no commandline version to get that output.

regards,
Thierry.

Re: What commands show all kernal parameters and values?

Deshpande Prashant — Thu, 15 Nov 2001 19:43:45 GMT

HI
If you have the SysInfo utility, you can use it to get kernel parameters.
#SysInfo -K

Thanks.
Prashant Deshpande.

Re: What commands show all kernal parameters and values?

Mary Ann Lipa — Fri, 16 Nov 2001 01:20:52 GMT

you can use:
# /usr/sbin/sysdef
which will show you the name of the parameter [NAME], its current value[VALUE], its value at boot time [BOOT], the minimum/maximum value allowed [MIN/MAX] the unit by which the parameter is measured [UNITS] and flags which are descriptions of the parameter...

another one is
# /usr/sbin/kmtune

d_b