topic Re: nis client config in Operating System - HP-UX

nis client config

Martin Robinson — Fri, 16 Nov 2001 12:17:27 GMT

unable to ypbind

Re: nis client config

G. Vrijhoeven — Fri, 16 Nov 2001 12:21:24 GMT

Hi,

use ypinit -s to set up the client.

Gideon

Re: nis client config

Eugen Cocalea — Fri, 16 Nov 2001 12:45:39 GMT

Hi,

/sbin/set_parms addl_netwrk

specify there the NIS domain and NIS server for the domain.

or use

/usr/sbin/ypinit -s

where can be ommited, but make sure you set it before with

domainname

E.

Re: nis client config

Sanjay_6 — Fri, 16 Nov 2001 14:16:31 GMT

Hi Robert,

check out this link from the hp doc site,

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B1031-90048/B1031-90048_top.html&con=/hpux/onlinedocs/B1031-90048/00/00/24-con.html&toc=/hpux/onlinedocs/B1031-90048/00/00/24-toc.html&searchterms=nis%20client&queryid=20011116-061916

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B1031-90048/B1031-90048_top.html&con=/hpux/onlinedocs/B1031-90048/00/00/43-con.html&toc=/hpux/onlinedocs/B1031-90048/00/00/43-toc.html&searchterms=nis%20client&queryid=20011116-061916

Hope this helps.

Regds