topic Re: SAS software version in Operating System - HP-UX

SAS software version

Dags — Mon, 08 Mar 2010 03:08:17 GMT

Hi Masters,

I would like to know what SAS(Statistical Analysis System) version I have on my box? I already tried this:
# swlist -l product |grep SAS
SAS-COMMON B.11.23.0803 Serial SCSI Common product
SAS-PROVIDER B.11.23.0712 Serial SCSI provider product
SAS-SASD B.11.23.0809 PCI-X/PCI-E Serial SCSI (SASD) Driver

but this not the SAS version I'm looking for. TIA.

Regards,
Dagz

Re: SAS software version

Dennis Handly — Mon, 08 Mar 2010 03:19:48 GMT

>but this not the SAS version I'm looking for.

No, those aren't the proper droids. :-)
SAS is also Serial-Attached SCSI.

Is your SAS installed with swinstall?
Have you tried what(1) on your executable.

Re: SAS software version

Dags — Mon, 08 Mar 2010 03:24:54 GMT

Is your SAS installed with swinstall?
Maybe, but I'm not sure. Our application vendor did the installation.

Re: SAS software version

Kapil Jha — Mon, 08 Mar 2010 03:27:44 GMT

may be u can try
swlist -l product |grep -i SAS

if its installed via swinstall.

BR,
Kapil+

Re: SAS software version

Dags — Mon, 08 Mar 2010 03:39:18 GMT

>may be u can try
>swlist -l product |grep -i SAS

same results as above. thanks for trying.

Re: SAS software version

Johnson Punniyalingam — Mon, 08 Mar 2010 03:51:04 GMT

>>Our application vendor did the installation.<<

if your Application vendor did the Installation with .depot format than can be only showed in "swlist"

Better to check with your "Vendor" or refer to documentation from your vendor .

Just thought, :)

Regards,
Johnson

Re: SAS software version

Dennis Handly — Mon, 08 Mar 2010 04:06:15 GMT

>Maybe, but I'm not sure.

If installed with swinstall, swlist should show it. Perhaps you need to grep for more things.

Do you know where it is installed?

Re: SAS software version

Dags — Mon, 08 Mar 2010 05:25:09 GMT

>Do you know where it is installed?

unfortunately not...

Re: SAS software version

Dennis Handly — Mon, 08 Mar 2010 05:27:28 GMT

>unfortunately not...

Does anyone know how to run it?

Re: SAS software version

Dags — Mon, 08 Mar 2010 05:31:33 GMT

>Does anyone know how to run it?

We use this command when we start SAS service:

#/sas9/sas913/utilities/bin/sastcpd -service 5019 -noinheritance &

Re: SAS software version

Johnson Punniyalingam — Mon, 08 Mar 2010 05:38:47 GMT

>>It would be better to post contens of below

# cd /sas9/sas913/utilities/bin
# ls -l

(buy checking file under above directory level look for version or something like that.....)

Just my "Guess" :(

# /sas9/sas913/utilities/bin/sastcpd -version

Re: SAS software version

Dennis Handly — Mon, 08 Mar 2010 05:51:03 GMT

>We use this command when we start SAS service:

So you now know where it is installed. :-)
You could try: what /sas9/sas913/utilities/bin/*