topic Re: SAM is not working in Operating System - HP-UX

SAM is not working

HP UNIX Professionals — Mon, 15 Mar 2010 17:03:14 GMT

Hi Experts,

When i try to start the SAM i am getting the following error. Anybody know why it is happening.
Please give proper guidance.

bbcc:/ # uname -a
HP-UX bbcc B.11.31 U ia64 1079113370 unlimited-user license

bbcc:/ # sam
System Administration Manager (SAM) is deprecated in this release of HP-UX.
System Management Homepage (SMH) is the new tool introduced to manage HP-UX.
You are recommended to use /usr/sbin/smh.

Looking for a usable running browser...
/usr/contrib/bin/X11/xlsclients: unable to open display "129.39.222.197:0"

Re: SAM is not working

Michal Kapalka (mikap) — Wed, 17 Mar 2010 03:40:22 GMT

hi,

check this thread from ITRC :

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1304219

mikap

Re: SAM is not working

Johnson Punniyalingam — Wed, 17 Mar 2010 04:14:25 GMT

Please use "SMH" instud of "SAM" its new feature in HPUX 11.31

#smh

Re: SAM is not working

Suraj K Sankari — Wed, 17 Mar 2010 06:11:52 GMT

Hi,

sam is no more with HPUX 11.31 you need to give smh instead of sam

Suraj

Re: SAM is not working

Horia Chirculescu — Wed, 17 Mar 2010 06:16:28 GMT

Hello,

You should run an Xserver at 129.39.222.197, or you can redirect the display on a windows workstation. If you are using putty, there is a way to automatically set up the DISPLAY variable.

One free Xserver for Windows stations is Xming:

http://www.straightrunning.com/XmingNotes/

Horia.

Re: SAM is not working

Torsten. — Wed, 17 Mar 2010 07:51:21 GMT

The message told you - no SAM in 11.31, but system management homepage (browser based).

So point your browser to

http://your_server_ip:2301

or

unset DISPLAY and use the text based smh.

Re: SAM is not working

Sagar Sirdesai — Wed, 17 Mar 2010 11:53:55 GMT

Hi
This error suggests that your DISPLAY is wrongly set.

1) unset DISPLAY
2) tem smh command

Use the above commands and it should work

Sagar

Re: SAM is not working

Michal Kapalka (mikap) — Wed, 17 Mar 2010 11:58:26 GMT

hi,

hust put this to the shell :

(unset DISPLAY; /usr/sbin/smh )

mikap

Re: SAM is not working

HP UNIX Professionals — Fri, 19 Mar 2010 18:03:16 GMT

Hi John,

I run the smh also it is throuing following error

bbcc:/ # smh
Looking for a usable running browser...
/usr/contrib/bin/X11/xlsclients: unable to open display "CSTIC.as.qc.beO.ca:0"
ERROR: Unable to open display "CSTIC.as.qc.beo.ca:0"
Please paste the URL "http://bbcc.qc.beo.ca:2301/?chppath=Tools" into a browser window.

Re: SAM is not working

HP UNIX Professionals — Fri, 19 Mar 2010 18:35:14 GMT

Hi Torstn,

I tried http://142.117.244.188:2301 also

IP of the Server :142.117.244.188. through the broser, it is alos not working

Re: SAM is not working

Bill Hassell — Fri, 19 Mar 2010 18:58:42 GMT

Thye fastest way to run sam or smh is to make sure the variable DISPLAY is not set. Do this:

unset DISPLAY

Then run sam or smh. It will come up in character mode. If DISPLAY is set, you must have already installed an Xwindow server such as eXceed or Reflection/X or some other X11 windows tool and configure it to work on your PC. Then there are issues with X11 forwarding, Xauthority and even network routers that can block Xwindows protocol.

You can do everything in the character mode interface (CUI) that you can in the fancy GUI but you may be struggling with X11 for a while. Note that at 11.31, the Xwindow desktop (and therefore the XDMCP code) is not installed by default. I would leave it that way. There is no reason to run code on your HP-UX server that replaces your PC's desktop with an archaic interface. If you get your Xwindow emulator working, always verify with the simplest commands:

export DISPLAY=:0
(don't forget the .0)
/usr/bin/X11/xclock

(a small clock will be displayed) Close this window and you can run smh in GUI mode.

Re: SAM is not working

genkimaruchan — Thu, 29 Apr 2010 03:30:15 GMT

Hi there

Maybe you can try this one

Verify of HPSMH ;autostart url` mode is ON by executing the command

# smhstartconfig

In case the autostart url mod is OFF, stop hpsmh by:

# /sbin/init.d/hpsmh stop

turn the autostart url mode by:

# smhstartconfig -a on -b off

Restart hpsmh

# /sbin/init.d/hpsmh start

Hope it works!

Thanks and Regards