topic Re: system table in Operating System - HP-UX

system table

Deeos — Tue, 24 Aug 2010 19:18:59 GMT

Hi all,

How will you check hp-ux system table usage?

Re: system table

James R. Ferguson — Tue, 24 Aug 2010 19:40:39 GMT

Hi:

Use 'glance' and toggle the 't'able display.

Otherwise, depending on what it is your are evaulating, use 'sar' [see the manpages].

Regards!

...JRF...

Re: system table

Dennis Handly — Tue, 24 Aug 2010 19:50:57 GMT

What HP-UX version are you using?
For 11.23 there is kcusage(1m) that will give you the info for about 25 tables.

Re: system table

Deeos — Tue, 24 Aug 2010 22:03:29 GMT

Hi Dennis,

I am using 11.23 ver. of HP-ux
here look over the output
.............................................

amdb01#kcusage
Tunable Usage / Setting
=============================================
dbc_max_pct 0 / 1
maxdsiz 16777216 / 2048000000
maxdsiz_64bit 43245568 / 34359738368
maxfiles_lim 41 / 8196
maxssiz 212992 / 134217728
maxssiz_64bit 81920 / 1073741824
maxtsiz 14524416 / 100663296
maxtsiz_64bit 1138688 / 1073741824
maxuprc 1 / 3687
max_thread_proc 34 / 3000
maxvgs 1 / 10
msgmni 2 / 4096
msgseg 0 / 32767
msgtql 0 / 4096
nfile 745 / 65536
nflocks 21 / 4096
ninode 817 / 60000
nkthread 381 / 8416
nproc 163 / 4200
npty 0 / 2024
nstrpty 1 / 1024
nstrtel 0 / 60
nswapdev 1 / 10
nswapfs 0 / 10
semmni 25 / 4096
semmns 27 / 8192
shmmax 17869512 / 10737419000
shmmni 7 / 1024
shmseg 3 / 1024
.............................................

is this system table you are telling me?

Regards
Deeos

Re: system table

Raj D. — Tue, 24 Aug 2010 22:24:54 GMT

Deeos,

To see the system table usage use:
# glance -t

-It will give the System Table Usage report with the detail values, used and available . And percentage utilization.

Cheers,
Raj.

Re: system table

Dennis Handly — Wed, 25 Aug 2010 07:10:35 GMT

>is this system table you are telling me?
>nfile 745 / 65536

Yes. And on this system nfile isn't full at all.