topic Re: Backup is not starting Automatically Using SAP in Operating System - HP-UX

Backup is not starting Automatically Using SAP

WW393114 — Wed, 15 Sep 2010 04:30:27 GMT

Hello,

i am adding the tape to VM's using the method mentioned in the mentioned thread. But after adding the tape back up is not starting automatically using SAP.

Please refer this thread. Also find the error messages i am getting.

Back Fails giving following error

BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: beebveaw
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt/0mn BR0131I All volumes get the name SCRATCH BR0129I Force option set - no label checking during initialization BR0134I Unattended mode with 'force' active - no operator confirmation allowed

BR0207I Volume in device: /dev/rmt/0mn will be initialized with name: SCRATCH

BR0280I BRBACKUP time stamp: 2010-09-09 13.00.07 BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0278E Command output of 'LANG=C mt -f /dev/rmt/0m rew':
/dev/rmt/0m: No such device or address
BR0280I BRBACKUP time stamp: 2010-09-09 13.00.08 BR0279E Return code from 'LANG=C mt -f /dev/rmt/0m rew': 1 BR0213E Winding tape volume in device /dev/rmt/0mn failed BR0219E Initialization of volume SCRATCH in device /dev/rmt/0mn failed

BR0206I End of backup volume initialization BR0280I BRBACKUP time stamp: 2010-09-09 13.00.08 BR0054I BRBACKUP terminated with errors

Please Help ASAP.

Thanks in advance.

Re: Backup is not starting Automatically Using SAP

Prashantj — Wed, 15 Sep 2010 05:17:39 GMT

Hi WW393114,

Please check the dmesg log and check the tape
drive status "ioscan -f /dev/rmt/0m" or check
ioscan -fnC tape.

Prashant

Re: Backup is not starting Automatically Using SAP

Dennis Handly — Wed, 15 Sep 2010 09:35:41 GMT

Your previous thread:
http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1446923

Re: Backup is not starting Automatically Using SAP

Eric SAUBIGNAC — Wed, 15 Sep 2010 10:09:24 GMT

Oups, didn't saw that you added a post to your previous thread.

Maybe the reason is just because you add/delete the tape online. So, instead of running 'insf -e' on a regular basis, should you run 'ioscan -C tape' in the VM after adding back the tape (as suggested by Prashantj) ?

Silly question : are you sure that the tape is correctly presented to the VM when you try to use it ?

Eric

Re: Backup is not starting Automatically Using SAP

WW393114 — Sun, 19 Sep 2010 08:25:19 GMT

Yes Eric.. i have presented i tape properly. i used command give by you itself.. Then also we are having problems in taking backup. Actually while intializing the tape with SAP we have getting this error and backup is not starting

Re: Backup is not starting Automatically Using SAP

WW393114 — Mon, 20 Sep 2010 16:59:20 GMT

Hello Eric,

As said i have used ioscan -C tape before starting the backup , then also it was not able to initialize properly giving same error.

Please check what all steps i have used and let me know anything wrong

1) I have added a dummy dvd device to the VM.using
hpvmmodify -P sflqly -a dvd:scsi:0,1,0:null:/depotcd. where depotcd is an empty directory.

2) Next i added Tape to VM

hpvmmodify -P sflqly -a tape:scsi:0,1,1:attach:/dev/rscsi/c0t3d0

With this commands i was able to add tape dynamically. But I am facing lot of problems with Automatic Backup using SAP.

Backup is failing randamly.. One day it will be sucessfull and some time it is failing giving below error

BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: beebveaw
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt/0mn BR0131I All volumes get the name SCRATCH BR0129I Force option set - no label checking during initialization BR0134I Unattended mode with 'force' active - no operator confirmation allowed

BR0207I Volume in device: /dev/rmt/0mn will be initialized with name: SCRATCH

BR0280I BRBACKUP time stamp: 2010-09-09 13.00.07 BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0278E Command output of 'LANG=C mt -f /dev/rmt/0m rew':
/dev/rmt/0m: No such device or address
BR0280I BRBACKUP time stamp: 2010-09-09 13.00.08 BR0279E Return code from 'LANG=C mt -f /dev/rmt/0m rew': 1 BR0213E Winding tape volume in device /dev/rmt/0mn failed BR0219E Initialization of volume SCRATCH in device /dev/rmt/0mn failed

BR0206I End of backup volume initialization BR0280I BRBACKUP time stamp: 2010-09-09 13.00.08 BR0054I BRBACKUP terminated with errors

As mentioned above i used ioscan -C tape command then also today backup failed.Please let me know how to solve this..

Thanks in Advance

Re: Backup is not starting Automatically Using SAP

Eric Antunes — Tue, 21 Sep 2010 08:45:09 GMT

Hi,

What does the command "kmtune -lq st_san_safe" return (Current)?

Eric

Re: Backup is not starting Automatically Using SAP

WW393114 — Thu, 23 Sep 2010 07:56:58 GMT

Hello

# kmtune -lq st_san_safe
sh: kmtune: not found.
# kctune -lq st_san_safe
ERROR: The -l option is not defined.
usage: kctune [-dghuvBDKS] [-b backup] [-c config] [-C comment] [-F fmt]
[-m module] [-P fields] [args...]
args are:
tunable (query tunable)
tunable= (set tunable to default)
tunable=Default (set tunable to default)
tunable=expr (set tunable to expression)
tunable+=value (increase tunable by value)
tunable>=value (set tunable to value if currently less)
# kctune st_san_safe
ERROR: There is no tunable named 'st_san_safe'.