topic Re: cmnetd: lan10 failed in Operating System - HP-UX

cmnetd: lan10 failed

motorello76 — Fri, 22 Oct 2010 08:41:37 GMT

Hi Guys,

Do you know what means this error messagge in syslog.log ?

"cmnetd: lan10 failed"
"cmnetd: lan10 recovered"

These appeared for three time in 10 minute.

May be a fault in ethernet card? Or may depends from the lan?

Thank you for your help!

Re: cmnetd: lan10 failed

rariasn — Fri, 22 Oct 2010 09:04:16 GMT

Hi;

Verify your LAN configuracion.

* Hardware LAN
* Cable
* Network switch port
* Network switch port configuration

rgs,

Re: cmnetd: lan10 failed

likid0 — Fri, 22 Oct 2010 09:38:00 GMT

You can also get more info, running on the server:

netfmt -f /var/adm/nettl.LOG000

Re: cmnetd: lan10 failed

SUDHAKAR_18 — Sun, 24 Oct 2010 09:32:44 GMT

pls post #cmviewcl -v o/p.

look like lan failure, may be physical lan cable got disconnected for the moment.

and it got recovered, if this error occur again and again, then you need to check lan cable.

Re: cmnetd: lan10 failed

SoorajCleris — Sun, 24 Oct 2010 14:26:29 GMT

Hi,

Just check your nettl logs , that will tell you what happend..

regards,
Sooraj