topic Re: HPUX 11iv2 and 11iv3 in Operating System - HP-UX

HPUX 11iv2 and 11iv3

Abubakkar — Sat, 30 Oct 2010 03:30:04 GMT

1)what is differends HPUX 11iv2 and 11iv3
2)what is LVM daemon
3)how to create depot
Kindly explain any one.

Re: HPUX 11iv2 and 11iv3

vishnu.khandare — Sat, 30 Oct 2010 04:06:40 GMT

Hi Abubakkar,

Difference between HPUX 11iV2 and V3 many,
actually HPUX 11iV3 is more advance then V2 and one point is that if u look at kernel parameters are less as compared to V2.

for more details Please look below thread

http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1288414875898+28353475&threadId=1349251

How to create depot?
Its very easy U need to download the patches in tar form, untar that and run the ./create depot, it will create depot.

Hope this solves ur query.
Dont forget to assign points.

Regards
Vishnu Khandare

Re: HPUX 11iv2 and 11iv3

Abubakkar — Sat, 30 Oct 2010 05:07:05 GMT

Dear Vishnu,
Thanks for updating,can u tell me LVM daemon

Re: HPUX 11iv2 and 11iv3

vishnu.khandare — Sat, 30 Oct 2010 05:16:37 GMT

Hi Abubakkar

LVM daemon is nothing but the Logical Volume Manager.
Please refer below links for further details,

http://networktechnologist.com/tips-hpux-lvm.html

Refer this thread also,
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=446311

Regards
Vishnu Khandare

Re: HPUX 11iv2 and 11iv3

P Arumugavel — Sat, 30 Oct 2010 05:34:25 GMT

>>1)what is differends HPUX 11iv2 and 11iv3

Major difference is benifit of agile naming view of device files. Both legacy and persistent can be used simultaneously to access mass storage devices. It meant auto multipathing using persistent dsf was new in 11iv3. Multipathing concept was always there from begining, but were done manually using vgextend and all.
dvd clon
ioscan -m dsf
persistant and legacy names
nwmgr
swconfig
check_patches
LVM v.2 volume group
lvmadm -t

>> 2)what is LVM daemon
# ps -ef |grep -i lvm*

>> 3)how to create depot
Refer #man swa
#man swpackage

Regds \ Vel

Re: HPUX 11iv2 and 11iv3

SoorajCleris — Sat, 30 Oct 2010 16:34:37 GMT

Hi Abubakkar,

I am sorry to say this but, I should say.

I understand that you are expecting the answers like a capsule. I would help you to find exact answer for question 2.

but if you asked question 2, I believe you may not be able to understand the answers of 1 and 3 even if I explain.

Answer to q -2

http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1288459921742+28353475&threadId=1394136

regards,
sooraj

Re: HPUX 11iv2 and 11iv3

S.N.S — Sat, 30 Oct 2010 17:13:00 GMT

Salaam Abu,

You need to some reading yourself...

...Multipathing - DMP - in v3 allows not only failover/high availability, but also gives load balancing.

Also, I guess, v3 has LVM2...

The rest it's already mentioned...

Cheers!

Re: HPUX 11iv2 and 11iv3

Fraga — Sun, 31 Oct 2010 18:09:21 GMT

in your patch...
/> sh PHXXXXX