RX Server not booting

seenivasan — Thu, 06 Jan 2011 12:17:14 GMT

Dear guys,

we are facing some problem on HP rx8640 server, when we try to start the
server, the boot device not be found, please check the logs and give
response, Thanks!

# model
ia64 hp server rx8640

logs:
EFI Boot Manager ver 2.00 [14.62] Please select a boot option
OS might use only the primary console set via boot manager or conconfig
command

HP-UX Primary Boot: 1/0/0/2/0.6.0
SYS LAN 0 Cabinet 0 [Acpi(HWP0002,PNP0A03,0)/Pci(1|0)/Mac(F4CE46
HP-UX Alternate Boot: 0/0/0/2/0.6.0
EFI Shell [Built-in]
Internal DVD (Upper) Cabinet 0 [Acpi(HWP0002,PNP0A03,0)/Pci(2|1)
SYS LAN 1 Cabinet 0 [Acpi(HWP0002,PNP0A03,100)/Pci(1|0)/Mac(F4CE
Boot Option Maintenance Menu

Use ^ and v to change option(s). Use Enter to select an option
Use > and < to view long descriptions
Hot Key: 'S' or 's' to start the EFI Shell

Selected boot option: HP-UX Primary Boot: 1/0/0/2/0.6.0

Loading.: HP-UX Primary Boot: 1/0/0/2/0.6.0

Load of HP-UX Primary Boot: 1/0/0/2/0.6.0 failed: Not Found

Selected boot option: SYS LAN 0 Cabinet 0
[Acpi(HWP0002,PNP0A03,0)/Pci(1|0)/Mac(F4CE46B0020B)]

Booting over the network

Client MAC Address: F4 CE 46 B0 02 0B

PXE-E12: Could not detect network connection. Check cable.
Load of SYS LAN 0 Cabinet 0
[Acpi(HWP0002,PNP0A03,0)/Pci(1|0)/Mac(F4CE46B0020B)] failed: Not Found

Selected boot option: HP-UX Alternate Boot: 0/0/0/2/0.6.0

Loading.: HP-UX Alternate Boot: 0/0/0/2/0.6.0

Load of HP-UX Alternate Boot: 0/0/0/2/0.6.0 failed: Not Found

Shell>
Selected boot option: EFI Shell [Built-in]

Loading.: EFI Shell [Built-in]

EFI Shell UEFI version 2.00 [14.62]
Device mapping table
fs0 :
Acpi(HWP0002,PNP0A03,100)/Pci(2|0)/Scsi(Pun6,Lun0)/HD(Part1,Sig0FB29908-
FD27-11DF-8002-D6217B60E588)
fs1 :
Acpi(HWP0002,PNP0A03,0)/Pci(2|0)/Scsi(Pun6,Lun0)/HD(Part1,Sig303C79AC-FD
20-11DF-8002-D6217B60E588)
fs2 :
Acpi(HWP0002,PNP0A03,0)/Pci(2|0)/Scsi(Pun6,Lun0)/HD(Part3,Sig303C79DE-FD
20-11DF-8004-D6217B60E588)
blk0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Scsi(Pun2,Lun0)
blk1 : Acpi(HWP0002,PNP0A03,100)/Pci(2|0)/Scsi(Pun6,Lun0)
blk2 :
Acpi(HWP0002,PNP0A03,100)/Pci(2|0)/Scsi(Pun6,Lun0)/HD(Part1,Sig0FB29908-
FD27-11DF-8002-D6217B60E588)
blk3 :
Acpi(HWP0002,PNP0A03,100)/Pci(2|0)/Scsi(Pun6,Lun0)/HD(Part2,Sig0FB29930-
FD27-11DF-8003-D6217B60E588)
blk4 :
Acpi(HWP0002,PNP0A03,100)/Pci(2|0)/Scsi(Pun6,Lun0)/HD(Part3,Sig0FB29944-
FD27-11DF-8004-D6217B60E588)
blk5 : Acpi(HWP0002,PNP0A03,0)/Pci(2|0)/Scsi(Pun6,Lun0)
blk6 :
Acpi(HWP0002,PNP0A03,0)/Pci(2|0)/Scsi(Pun6,Lun0)/HD(Part1,Sig303C79AC-FD
20-11DF-8002-D6217B60E588)
blk7 :
Acpi(HWP0002,PNP0A03,0)/Pci(2|0)/Scsi(Pun6,Lun0)/HD(Part2,Sig303C79CA-FD
20-11DF-8003-D6217B60E588)
blk8 :
Acpi(HWP0002,PNP0A03,0)/Pci(2|0)/Scsi(Pun6,Lun0)/HD(Part3,Sig303C79DE-FD
20-11DF-8004-D6217B60E588)

startup.nsh> echo -off

setting hpux path(\EFI\HPUX)...
type 'fs[x]:' where x is your bootdisk (0, 1, 2...)
type 'hpux' to start hpux bootloader

Re: RX Server not booting

Torsten. — Thu, 06 Jan 2011 12:21:14 GMT

>> Load of HP-UX Primary Boot: 1/0/0/2/0.6.0

Dead disk?

Try to boot from fs0: manually.

Re: RX Server not booting

Benoy Daniel — Fri, 07 Jan 2011 04:06:26 GMT

Go to shell prompt and try to boot it manually. If you can able to boot, then once the server is up, set the setboot once again and reboot it.

Re: RX Server not booting

Manix — Fri, 07 Jan 2011 06:50:51 GMT

EFI boot maintenance Menu > exit to the shell

You may go to efi shell & run "map -r -b"
to get bootable media.

Remember DOS commands works in efi shell.

you may see some media listed as fs0: fs1:

you may cd to that partition & check if following directory path exists /efi/hpux/hpux.efi exist which contains the boot loader.

Only bootable media contains the mentioned
directory path

try to boot from that partition /media /disk.

It may boot up .other wise recovery console may be used !!

Thanks

Manix

Re: RX Server not booting

INH — Sat, 08 Jan 2011 14:04:46 GMT

Hello

can't rule out deffective disk, check physically on server fronpanel.

>>
# model
ia64 hp server rx8640
------
This server model require appropriate puplation of local disk in bay. you may referinstallation manual or contact HP.

other option is boot manually and try

HTH

Regards,
INH

topic Re: RX Server not booting in Operating System - HP-UX

RX Server not booting

Re: RX Server not booting

Re: RX Server not booting

Re: RX Server not booting

Re: RX Server not booting