topic display kernal parameter settings in Operating System - HP-UX

display kernal parameter settings

Jeffrey Shannon — Tue, 27 Nov 2001 20:34:54 GMT

Is there a commnand or file that displays the server's kernal parameter settings?

Re: display kernal parameter settings

Sanjay_6 — Tue, 27 Nov 2001 20:38:05 GMT

Hi Jeff,

On HP-UX 11.0

use

kmtune -S /stand/system

or

kmtune -l /stand/system

Hope this helps.

regds

Re: display kernal parameter settings

James R. Ferguson — Tue, 27 Nov 2001 20:38:47 GMT

Hi Jeffrey:

On 10.20 use:

# sysdef

On 11.x use:

# kmtune -l

Regards!

...JRF...

Re: display kernal parameter settings

fg_1 — Tue, 27 Nov 2001 20:40:34 GMT

Hi there, you can look at the /stand/system file for a listing of all parameters that are modified, or you can go into SAM/KERNEL CONFIGURATION/CONFIGURABLE PARAMETERS and print out a list of the parm settings. Be careful when updating parameters since some of them tie into each other in one way or another.

Good luck.

Re: display kernal parameter settings

G. Vrijhoeven — Tue, 27 Nov 2001 20:43:35 GMT

Hi,

sysdef, kmtune -s, sam (kernel) are your options.

Gideon

Re: display kernal parameter settings

Roger Baptiste — Tue, 27 Nov 2001 20:43:54 GMT

Jeff,

#kmtune -q

This will give the current setting of the kernel parameter.

egL #kmtune -q nfile
8192
#

HTH
raj

Re: display kernal parameter settings

fg_1 — Tue, 27 Nov 2001 20:44:24 GMT

Hello there,

Another thing that may help you in the future if you don't already have it is this link to a document on Configuring Kernel Parms. Hope you find this helpful.

Frank

http://www.docs.hp.com/hpux/onlinedocs/os/KCparams.OverviewAll.html

Re: display kernal parameter settings

Deepak Extross — Wed, 28 Nov 2001 03:04:49 GMT

Hi,
Have a look at this thread
http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x0bfd3c853cd9d5118ff40090279cd0f9,00.html