https://community.hpe.com/t5/operating-system-hp-ux/stuck-in-sam/m-p/4741584#M387264 I tried to access SAM from the secure web console. When it asked for a term type I entered vt100. I wanted to delete a print job and now I am stuck in the help screen. Any suggestions?<BR />Thank you, Thu, 20 Jan 2011 16:28:59 GMT John Chalres 2011-01-20T16:28:59Z https://community.hpe.com/t5/operating-system-hp-ux/stuck-in-sam/m-p/4741584#M387264 I tried to access SAM from the secure web console. When it asked for a term type I entered vt100. I wanted to delete a print job and now I am stuck in the help screen. Any suggestions?<BR />Thank you, Thu, 20 Jan 2011 16:28:59 GMT https://community.hpe.com/t5/operating-system-hp-ux/stuck-in-sam/m-p/4741584#M387264 John Chalres 2011-01-20T16:28:59Z https://community.hpe.com/t5/operating-system-hp-ux/stuck-in-sam/m-p/4741585#M387265 I had a similar problem...<BR /><BR />Might try Cntl ^B and reset the GSP via XD - R to login back in and just use telent and then use SAM without the Web interface.<BR /><BR />Rgds, Thu, 20 Jan 2011 21:00:03 GMT https://community.hpe.com/t5/operating-system-hp-ux/stuck-in-sam/m-p/4741585#M387265 cnb 2011-01-20T21:00:03Z https://community.hpe.com/t5/operating-system-hp-ux/stuck-in-sam/m-p/4741586#M387266 Can XD-R be run from root? Someone else also mentioned accessing root via telenet and I will do that in the future.<BR />Thank you, Mon, 24 Jan 2011 13:40:13 GMT https://community.hpe.com/t5/operating-system-hp-ux/stuck-in-sam/m-p/4741586#M387266 John Chalres 2011-01-24T13:40:13Z