topic Re: solution for PRA in Operating System - HP-UX

solution for PRA

Ludovic Derlyn — Thu, 17 Feb 2011 12:04:22 GMT

Hi,

i have tested this solution for PRA

DRD on root disk one disk is internal other is external (boot on san)

when i present disk boot on san on the server , i have a panic

igelan0: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0
igelan1: INITIALIZING HP A9782-60002 PCI/PCI-X 1000Base-SX FC/GigE Combo Adapter at hardware path 0/3/1/0/6/0
igelan2: INITIALIZING HP A9782-60001 PCI/PCI-X 1000Base-SX FC/GigE Combo Adapter at hardware path 0/4/1/0/6/0

System Console is on the Built-In Serial Interface
WARNING: ROOT device 0x1f402000 is a non-LVM partition, disallowed on LVM disk.
WARNING: ROOT device 0x1f402000 has been deconfigured (set to 0xffffffff).

-----------------------------------------------------
| |
| SYSTEM HALTING during LVM Configuration |
| |
Non-lvm root on LVM disk
| |
-----------------------------------------------------

System Panic:

linkstamp: Sun Jul 12 15:11:23 METDST 2009
_release_version: @(#) $Revision: vmunix: B11.23_LR FLAVOR=perf Fri Mar 19 15:24:05 PST 2004 $
panic: LVM: Configuration failure

PC-Offset Stack Trace (read down, top of stack is 1st):
0x007e2e80 (panic+0xc0)
0x00650c1c (lv_boothalt+0x7c)
0x00650744 (lv_check_boot+0xfc)
0x00650ae8 (lvmconf_body+0x1f0)
0x006b603c (lvmconf+0x24)
0x00654c28 (im_lvmconf+0x28)
0x00865df0 (DoCalllist+0x100)
0x006569b8 (main+0x28)
0x0012c654 ($vstart+0x48)
0x002341e0 (istackatbase+0x88)
End Of Stack

have you any idea

server is RP3440 PA Risc,11iv2

thanks a lot

Re: solution for PRA

Rita C Workman — Thu, 17 Feb 2011 12:45:26 GMT

When you say present the disk - I'm going to take that as meaning your trying to come up on the SAN disk.

But....from what I can see:
"WARNING: ROOT device 0x1f402000 is a non-LVM partition, disallowed on LVM disk."

that disk is bootable. So it leads me to ask what steps did you use to set up this external SAN disk as a boot disk?

Can you shed a little light on the steps you took to make the SAN disk a boot disk?

Regards,
Rita

Re: solution for PRA

Rita C Workman — Thu, 17 Feb 2011 12:46:35 GMT

..typo..

shoud read:

"that disk is non-bootable".

/rcw

Re: solution for PRA

Ludovic Derlyn — Thu, 17 Feb 2011 13:14:45 GMT

hi

drdclone -t /dev/dsk/cxtyd0
before testing drdsync

regards

L-DERLYN

Re: solution for PRA

Ludovic Derlyn — Thu, 17 Feb 2011 13:49:30 GMT

needs patchs and firmware up to date

hpux -lm give

_release_version: @(#) $Revision: vmunix: B11.23_LR FLAVOR=perf Fri Mar 19 15:24:05 PST 2004 $
panic: all VFS_MOUNTROOTs failed: NEED DRIVERS ?????

Re: solution for PRA

Rita C Workman — Thu, 17 Feb 2011 13:53:54 GMT

Ohh...so your trying to make a drd clone. Sorry, didn't get that...I prefer:

drd clone -v -x overwrite=true -t

Rita