topic Re: Minimum System Requirements in Operating System - HP-UX

Minimum System Requirements

Arun Jain — Tue, 31 May 2011 03:41:29 GMT

Hi All,

I have one HP rx2660 itanium server with 2 GB RAM.

I am trying to install HPUX 11.31 (DC-OE) but getting the below message after it passes "Analysing Software to be installed" :

"Operating system software has not been successfully loaded. The swm install (1M) application was not completed or failed to load some key files (exit status was=1).
1) Change in install server and/or depot information :
2) Retry software load process (non-interactive mode)
3) Retry software load process (interactive mode)
4) Run a Shell
Choose a recovery action from above:"

Please suggest on the above message. I suspect the minimum requirements for installation are met or not.

Thanks in Advance.
Arun Jain

Re: Minimum System Requirements

Torsten. — Tue, 31 May 2011 03:49:48 GMT

You should read the manual and release notes about your 11.31 release version to find the requirements - also read what the system logs tell(to screen or ignite server).

Re: Minimum System Requirements

Arun Jain — Tue, 31 May 2011 04:09:01 GMT

Hi Torsten,

Thanks for the reply, but the machine is old and I do not have any release notes with me. Can u please help me out with this.
Also, is the issue really related to system requirements. Please give your inputs for the message I sent in my initial mail.

BR
...AJ...

Re: Minimum System Requirements

Torsten. — Tue, 31 May 2011 04:14:01 GMT

Take a look at the DVDs and read the release date, e.g. September 2010 or something.

Find the documentation at

http://www.hp.com/go/hpux-core-docs