topic Re: my problem is not resolved in Operating System - HP-UX

my problem is not resolved

S.KICHOU — Wed, 01 Jun 2011 07:14:54 GMT

thank you for answering me, my problem is not resolved

#echo $DISPLAY
172.19.21.144:0.0

#DISPLAY=172.19.21.144:0.0

#export DISPLAY

#gpm
Connecting to Display...
Error: Can't open display: 172.19.21.144:0.0
Error: Couldn't find per display information

Re: my problem is not resolved

Duncan Edmonstone — Wed, 01 Jun 2011 07:19:39 GMT

You should continue this in your old post, not create a new one...

So presumably 172.19.21.144 is the IP address of your PC? And you are running some sort of X windows server software on it?

HTH

Duncan

Re: my problem is not resolved

S.KICHOU — Wed, 01 Jun 2011 07:52:03 GMT

I did not install this tool

Re: my problem is not resolved

Duncan Edmonstone — Wed, 01 Jun 2011 08:04:36 GMT

So how are you accessing the HP-UX server? Do you have any sort of graphical console available to you?

If not, you can't run the GUI version of glance, you'll just have to use the character version, by typing:

# glance

HTH

Duncan

Re: my problem is not resolved

S.KICHOU — Wed, 01 Jun 2011 08:22:04 GMT

thank you for answering me. I seen it used GlancePlus by more explicit but it works very well with #glance

Re: my problem is not resolved

Torsten. — Wed, 01 Jun 2011 08:38:32 GMT

See your other thread:

http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1482375

Re: my problem is not resolved

S.KICHOU — Wed, 01 Jun 2011 14:29:11 GMT

hello

system HP UX 32G RAM ET 4 PROCESS

how to identify the tools used to monitor server performance
how to identify bottlenecks ( les goulots dâ Ã©tranglements ) and potential problems
how to determine appropriate actions to remedy problems

Re: my problem is not resolved

Laurent Menase — Wed, 01 Jun 2011 19:34:46 GMT

glance and glance adviser mode are usually good tools to start

Else if you want to use gpm from a PC
you need to hae a X server on your PC.
if under windows, you can use
-cygwin Xserver
-reflexionX
...

if you are under linux, just add remote connections to X server

Also you need to execute "xhost +"
to permit X11 accesses.

Re: my problem is not resolved

S.KICHOU — Thu, 02 Jun 2011 05:36:23 GMT

HELLO

thank you for your reply. I want to use to manage my system HP UX WITH GlancePlus . is that I can find explanation regarding the interface GlancePlus

.thank you0.

Re: my problem is not resolved

Michael Sillers — Wed, 06 Jul 2011 17:54:13 GMT

Take a look at this thread...
http://h30499.www3.hp.com/t5/ITRC-OV-Performance-Management/HPUX-GlancePlus/m-p/2785170#M1651
It's a little old but it should help you find some of the information you need.