topic Re: EMS error message. in Operating System - HP-UX

EMS error message.

RAC_1 — Thu, 11 Jul 2002 12:56:33 GMT

I am getting the following error message in syslog file

Jul 11 19:32:49 admsvr EMS [1165]: ----- EMS Monitor Restart due to system reboot ----- Title: lpmc_em Command: /usr/sbin/stm/uut/bin/tools/monitor/lpmc_em Vendor: Hewlett-Packard Company Version: B.01.00 To obtain a list of currently monitored resources, execute the following: /opt/resmon/bin/resdata -M 3292848383

if I excecute the above mentioned command I get this output.

/system/events/cpu/lpmc/cache_errors

But If I run cstm I am not getting any error.
And one more thing telnet messages is not being logged in syslog. (I have tried inetd -c,reboot etc.)

Thanks in advance.

Re: EMS error message.

T G Manikandan — Thu, 11 Jul 2002 13:04:20 GMT

What version of hpux you are running

I just found some messages in this patch of STM for hpux11.11

PHSS_26268

Thanks

Re: EMS error message.

RAC_1 — Thu, 11 Jul 2002 13:09:13 GMT

it's 11.11. I am using cstm to get the memory information. This is A class machine.

Re: EMS error message.

Dave Chamberlin — Thu, 11 Jul 2002 13:10:22 GMT

On the less exciting problem - telnet messages not being logged- just run: /usr/sbin/inetd -l . This will toggle those telnet messages on or off.

Re: EMS error message.

Patrick Wessel — Thu, 11 Jul 2002 14:12:35 GMT

Anil,
The message told you, that the monitor has been restarted and not, that the monitor has detected an error.

Re: EMS error message.

RAC_1 — Thu, 11 Jul 2002 14:27:22 GMT

It is also asking to execute a command. Why?

And after executing that command I am getting some output.

The syslog.conf is as follows-

# @(#) $Revision: 74.1 $
#
# syslogd configuration file.
#
# See syslogd(1M) for information about the format of this file.
#
mail.debug /var/adm/syslog/mail.log
*.info;mail.none /var/adm/syslog/syslog.log
*.alert /dev/console
*.alert root
*.emerg *

It is the same on one other server also, but there I do not get these messages. Why?

Can someone throw some light on this?

Re: EMS error message.

Martin Burnett_2 — Thu, 11 Jul 2002 16:07:13 GMT

Hello,

It appears there is a problem internal to your EMS software. EMS by default issues restart messages that are "informational" and are logged in /var/opt/resmon/log/event.log. They should not be logged into your syslog unless you have changed the defaults.

1. By running the following command you see where all of the events are sent:

/etc/opt/resmon/lbin/moncheck |more

For /adapters/events/TL_adapter/0_12_0_0.8.0.255.0:
Events >= 1 (INFORMATION) Goto TEXTLOG; file=/var/opt/resmon/log/event.log
Events >= 3 (MAJOR WARNING) Goto SYSLOG
Events >= 3 (MAJOR WARNING) Goto EMAIL; addr=root
Events >= 4 (SERIOUS) Goto TCP; host=nitro.atl.hp.com port=49406...truncated text....

Check and make sure you are not sending information messages to syslog.

2. Check the /var/opt/resmon/log/api.log and search for lpmc errors.

3. Check the README file for the version of Diagnostics you have installed to make sure you have all of the required patches for the appropriate version:

http://www.docs.hp.com/hpux/onlinedocs/diag/st/st_read.htm

You can determine the release date by using the table of versions and the version of Support Tools Manager installed:

swlist -l product |grep -i sup-tool-mgr
Sup-Tool-Mgr B.11.00.20.09 Support Tools Manager for HPUX systems

Take this number to:

http://www.docs.hp.com/hpux/onlinedocs/diag/stm/stm_upd.htm#table

In this example B.11.00.20.09 = March 2002.

4. Versions of STM and EMS are bundled together in the OnlineDiag software. As such they are rev locked and should not be other than shown in the table of versions. Make sure you do not have different software versions other than those that are shown together.

Thanks for participating in the forums,

Martin
Chaos reigns within. Reflect, repent, and reboot. Order shall return.

Re: EMS error message.

RAC_1 — Tue, 12 Oct 2004 15:57:52 GMT

Closed