topic Re: ioinit cannot reassign a instance number in Operating System - HP-UX

ioinit cannot reassign a instance number

Jdamian — Thu, 16 Jan 2003 16:13:08 GMT

Hi.

In a N-class server I tried to reassign a instance number of an interface but ioinit failed and reported that the instance number was already assigned... but it is not true.

'ioscan -kfnC ext_bus' shows the instance numbers are: 0,1,2,13,14,15,16,17,18.

I want to reassign 13,14,... to 3,4,...

Then I created a file according to ioinit man pages:

0/10/0/0.1.21.0.0 ext_bus 4

I rebooted the system in single-user and ran:

ioinit -f file -r

but ioinit reports that instance number 4 is already assigned.

can anyone help me ?

Re: ioinit cannot reassign a instance number

Jdamian — Thu, 16 Jan 2003 16:17:26 GMT

where I wrote "I want to reassign 13,14,... to 3,4,.." I wanted to write "I want to reassign 13,14,... to 4,5,.."

The ioinit error messages is:

ioinit: Instance number 4 already exists for class ext_bus.
Line 1. 0/4/0/0.1.21.0.0 ext_bus 4

thanx in advance

Re: ioinit cannot reassign a instance number

Jean-Louis Phelix — Thu, 16 Jan 2003 16:25:32 GMT

hi,

Sometimes, slots remains used in the ionit files while they shouldn't. It seems to be your problem ... In this case, the only way to to what you want is to rebuild it completly :

1 - generate a new infile

ioscan -kfn | grep -e INTERFACE -e DEVICE | grep -v target | awk '{printf "%-40s %-20s %5s\n", $3, $1, $2}' and change all required instances

2 - mv /stand/ioconfig /stand/ioconfig.sav
mv /etc/ioconfig /etc/ioconfig.sav

3. shutdown -r

4. interrupt the boot process, boot pri, interact with ISL.

5. ISL> hpux -is

6. cd /stand
/sbin/ioinit -c
/sbin/ioinit -f infile

7. /sbin/reboot

Regards

Re: ioinit cannot reassign a instance number

James R. Ferguson — Thu, 16 Jan 2003 16:28:16 GMT

Hi:

It sounds as if instance #4 was at one time valid and that this is being "remembered". There is a good procedural discussion of how to attack reassigning instance numbers *and* a tool to expose hidden values in the Software Recovery Handbook (chapter-14):

http://www2.itrc.hp.com/service/iv/docDisplay.do?docId=/DE_SW_UX_swrec_EN_01_E/IO.pdf

Regards!

...JRF...

Re: ioinit cannot reassign a instance number

Jdamian — Thu, 16 Jan 2003 16:58:58 GMT

Thanx a lot, James and Jean-Louis.

James, in the chapter 14, a tool called "ioconfig2instance" is mentioned. Where can I find it ?

Thanx again

Re: ioinit cannot reassign a instance number

James R. Ferguson — Thu, 16 Jan 2003 17:03:19 GMT

Hi (again):

To obtain the 'ioconfigtoinfile' tool, I believe you will need to call the Response Center.

Regards!

...JRF...

Re: ioinit cannot reassign a instance number

Nabil Boussetta — Thu, 03 Feb 2005 09:29:18 GMT

Re: ioinit cannot reassign a instance number

Jdamian — Tue, 14 Oct 2008 18:18:31 GMT