topic Re: SYSCMDS in Operating System - HP-UX

SYSCMDS

Norman_21 — Thu, 30 Jan 2003 10:28:00 GMT

HI guys,

First time when I installed the ignite, the /opt file system was full and I had to remove the SYSCMDS to have some space as being advised by someone. However, here I'm again trying to creat a nother recovery tape but it fails because it can not find that file. Any advice will be appreciated.
Thanks.

Re: SYSCMDS

Dietmar Konermann — Thu, 30 Jan 2003 10:34:27 GMT

The SYSCMDS is a required component. Restore it or re-install Ignite.

Re: SYSCMDS

Ian Dennison_1 — Thu, 30 Jan 2003 10:46:40 GMT

If you have a good tape backup of the /opt mount point(not Ignite, more like fbackup or omniback), now would be a good time to load it.

If you run out of space on /opt, create a new lvol for one of the larger areas and copy the data across.

This is not impossible to repair.

Share and Enjoy! Ian

Re: SYSCMDS

Norman_21 — Thu, 24 Feb 2005 12:27:10 GMT

Removing the SYSCMDS was a bad idea. I had to reinstall the IGNITE-UX utility.