topic Re: LPSTAT in Operating System - HP-UX

LPSTAT

ARUN_19 — Fri, 30 May 2003 04:06:57 GMT

Hello ..

We have a print server and file server running hp-ux 10.2. On the file server there is no local printer configured but uses remote printer on print server. Once the job is submitted on the file server , it will be moved to print server.

As long as the print que in the file server , lpstat -t command does not show time stamp. It just shows job id. How do we get time of submission and priority of the job submitted.

Where as on the print server lpstat -t command list timestamp and priority of the job.

KIndly advice if anything to be configured in the print spool setup.

Regards ..

Arun

Re: LPSTAT

S.K. Chan — Fri, 30 May 2003 04:37:50 GMT

The details that you wanted only get logged on the printer server side (ie in the file /var/adm/lp/log). You should see something like ..
-
......
Start: -

End: -

...
Is this what you wanted ?

Re: LPSTAT

ARUN_19 — Sat, 31 May 2003 14:50:53 GMT

No, actually i am just looking for the print spool status....

Re: LPSTAT

Bill Douglass — Sun, 01 Jun 2003 12:57:31 GMT

What S. K. is saying is that rmpte printer queues are different from local printer queues. The rempte printer model on HP-UX does not provide the same capability as local-queue models. Check out the APPLICATION NOTES section of the lpstat man page.

Re: LPSTAT

ARUN_19 — Sun, 01 Jun 2003 17:02:56 GMT

Thanks ,i have raed the application note...but
also observed that the print spool status appears with all the information including the time stamp randomly..i.e some time it appears some time not...it is hard to convince the customer as why it happens so!!!!

Re: LPSTAT

Jim Butler — Sun, 01 Jun 2003 18:37:42 GMT

You can edit the /etc/lp/interfaces file to write the info you need to a file. Then you can report on that file. Timestamps from a print server are typically current, i.e, if a job is holding the queue, the timestamp continuously updates, not giving you the "request time" (which I think is what you want).
Anyway, look in the print requests file in /usr/spool/lp for more info.

Re: LPSTAT

ARUN_19 — Sun, 14 Sep 2008 09:56:35 GMT

closing old threads