topic Re: Boot problems on rx2600 in Operating System - HP-UX

Boot problems on rx2600

Arunkumar_3 — Tue, 21 Sep 2004 15:53:55 GMT

Hi,
I am seeing "Loading device drivers" message when I reboot my rx2600 system. I have A6826A HBA cards, I thought the problem is because of those, and removed the FC cables and tried to reboot. Didn't work. I powered off and powered on, no use.

I saw the following error messages in console output
*****
************* SYSTEM ALERT **************
SYSTEM NAME: uninitialized

21 Sep 2004 20:38:21
Alert Level 7: Fatal
Keyword: Type-02 137001 1273857
Machine Check initiated
Logged by: SFW-redundant; Sensor: Critical Interrupt
Data2: OEM Code2: 0x00
0xC14150913D021FB0 003FA17000130300

A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:Timeout!
*****************************************

************* SYSTEM ALERT **************
SYSTEM NAME: uninitialized

21 Sep 2004 20:38:21
Alert Level 7: Fatal
Keyword: MC_INITIATED
Machine Check initiated
Logged by: System Firmware 0
Data: Implementation dependent data field
0xF680009800E01FC0 0000000000000000
****

Can anyone help in this regards???

thanks in advance
-Arun

Re: Boot problems on rx2600

david shetler — Tue, 21 Sep 2004 16:48:57 GMT

Did you just remove the fibre cables and not the cards? To fully check the hardware you would need to physically remove the cards.

Re: Boot problems on rx2600

Arunkumar_3 — Wed, 22 Sep 2004 11:45:29 GMT

I have two hba cards. I removed one. Still problem persist. Ok. I will remove another card and try.

Re: Boot problems on rx2600

Arunkumar_3 — Mon, 04 Oct 2004 13:30:56 GMT

Hi,
I removed the hba cards, and rebooted. Not it failed with the following message

x ./monitor_bpr, 31492 bytes, 62 tape blocks
* Download_mini-system: Complete
* Loading_software: Begin
* Installing boot area on disk.

************* SYSTEM ALERT **************
SYSTEM NAME: uninitialized

04 Oct 2004 17:58:32
Alert Level 7: Fatal
Keyword: Type-02 137001 1273857
Machine Check initiated
Logged by: SFW-redundant; Sensor: Critical Interrupt
Data2: OEM Code2: 0x00
0xC141618F48022760 003FA17000130300

A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:
*****
I tried to boot from CD, boot from Ignite server, no use.
Can any one help? I have 3 internal disks, tried all the 3 disks, same error.

thanks
-Arun

Re: Boot problems on rx2600

Robert-Jan Goossens_1 — Mon, 04 Oct 2004 14:20:40 GMT

Hi Arun,

If you have hardware support call HP and log a hardware call.

Best regards,
Robert-Jan

Re: Boot problems on rx2600

Arunkumar_3 — Thu, 24 Mar 2005 13:51:04 GMT

thanks