topic Re: Multiple EMS versions on same server. in Operating System - HP-UX

Multiple EMS versions on same server.

Serge Poitras — Mon, 25 Oct 2004 08:08:26 GMT

Hi folks,

It's been a while since I dabbed into the EMS environment so this warrants my 2 inquiries ont his beast;

#1 Can we have multiple (different) versions of EMS installed on the same server ? I recall some time ago someone stating that it could be the cause for either erronous or bogus messages logged by EMS. Example of repetitive messages attached at end of this thread (seems to repeat itself every 2nd day).

NOTE: The reason that leads us to believe that these are bogus messages, is that no system malfunction or unexplained behavior were reported.

Presently we have this on an rp8400 running UX version 11.11:

EMS-Config A.04.00 EMS Config
EMS-Core A.03.20.01 EMS Core Product
EMS-Core A.04.00 EMS Core Product
EMS-DiskMonitor A.03.20.01 EMS Disk Resource Monitor
EMS-KRMonitor A.11.11.04 EMS Kernel Resource Monitor
EMS-MIBMonitor A.03.20.01 EMS MIB Resource Monitor Product
EMS-RdbmsMon A.03.20.01 EMS Database Monitor
PHSS_28844 1.0 EMS & HA Monitors (A.03.20.01) patch

#2 How can one confirm which version is presently running ? Checked startup scripts in /sbin/rc2.d, ps output, etc...it does'nt seem to be an obvious piece of data to locate, other than a swlist output...?

Your time and replies will be sincerely appreciated and welcome.

Cheers,
Serge

Re: Multiple EMS versions on same server.

Steven E. Protter — Mon, 25 Oct 2004 08:12:17 GMT

I would remove with swremove the 3.2 versions of EMS and possibly reinstall 4.00 EMS.
Probably elements of both versions are running right now.

SEP

Re: Multiple EMS versions on same server.

eran maor — Mon, 25 Oct 2004 08:23:52 GMT

Hi

i will not recommend to have 2 version of EMS on the same computer , please swremove all version and install the EMS version 4.X .

to get info about your ems , you can run the hamon.sh to get this info .

eran

Re: Multiple EMS versions on same server.

Cheryl Griffin — Mon, 25 Oct 2004 08:32:06 GMT

To avoid problems, it would be best to load all updated versions of the Support Tools (EMS and STM).

The compatiblity matrix is located at
http://docs.hp.com/hpux/onlinedocs/diag/stm/stm_upd.htm#table

Re: Multiple EMS versions on same server.

Serge Poitras — Mon, 25 Oct 2004 09:53:20 GMT

Thank to all that replied so far, it somewhat confirms what I initially suspected.

How can I tell though which version is actually running ?

Thanks again to all, points will be awarded by the end of the day.

Rgds,
Serge

Re: Multiple EMS versions on same server.

Cheryl Griffin — Mon, 25 Oct 2004 12:38:36 GMT

Serge,
It looks like you were at EMS version A.03.20 but upgraded it to A.04.00.

You can confirm the version you're running with:
# what /etc/opt/resmon/lbin/registrar

Re: Multiple EMS versions on same server.

Serge Poitras — Mon, 25 Oct 2004 13:37:00 GMT

Cheryl,

Thank you, this confirmed the last missing piece I was looking for.

Points will be allocated and thread will be closed.

thank you very much once again,
Serge

Re: Multiple EMS versions on same server.

Serge Poitras — Mon, 25 Oct 2004 13:39:09 GMT

Issues with multiple EMS versions on same server.

Better off to remove old version software if at all possible.

Syntax "what /etc/opt/resmon/lbin/registrar" confirmed running version.