topic Re: ipcrm fails! in Operating System - HP-UX

ipcrm fails!

Andi Rigauer — Wed, 05 Dec 2001 10:04:45 GMT

Hi there,
today I saw 2 dead shared memory segments with ipcs -m. These two segements were nearly 700 Megs big, --> ipcs -ma . the machine has only 2 Gigs memory. OK what I also saw was an key that looked like as follow 0x000000. now when i did an ipcrm -m there was always a message that he couldn't find the ID.
has anybody ever had the same problem yet? how do you fixed it, without reboot?

Thanx in advance

Re: ipcrm fails!

Steven Sim Kok Leong — Wed, 05 Dec 2001 10:17:56 GMT

Hi,

Does the mode of the ID you want to remove contain a D?

ie. D-rw-rw-rw-

If the shared memory segment is already detached, you need not bother about it. It is analogous to a "" process.

If it is not detached, perhaps you would like to show us the ipcs output and the command you type along with the error (screen dump).

Hope this helps. Regards.

Steven Sim Kok Leong
Brainbench MVP for Unix Admin
http://www.brainbench.com

Re: ipcrm fails!

Andi Rigauer — Wed, 05 Dec 2001 10:34:11 GMT

Hi,

thanx for the answer, yes it had a D
and I couldn't restart the database because of the shared memory

Re: ipcrm fails!

Steven Sim Kok Leong — Wed, 05 Dec 2001 14:13:55 GMT

Hi,

You cannot remove a shared memory segment that is already detached (released).

Did you also check your semaphores ie. ipcs -b -s?

If these are runaway semaphores, they must similarly be removed via ipcrm.

Hope this helps. Regards.

Steven Sim Kok Leong
Brainbench MVP for Unix Admin
http://www.brainbench.com

Re: ipcrm fails!

Sridhar Bhaskarla — Wed, 05 Dec 2001 14:19:03 GMT

You cannot further remove a shared memory segment that is already marked to be "D"eleted. It will be automatically deleted once the last process attached to it is completed. If it is staying long, then the process might have become runaway.

-Sri

Re: ipcrm fails!

Deepak Extross — Thu, 06 Dec 2001 01:48:08 GMT

This thread should help:
http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xf15e0b0717d1d5118ff40090279cd0f9,00.html

Re: ipcrm fails!

T. M. Louah — Thu, 06 Dec 2001 02:58:07 GMT

1- do: ipcs -mop
Look for the KEY and NATTCH column :
If both are 0, then use ipcs to remove the segment.
the following 1Liner will report the ID, KEY & NATTACH :
ipcs -mop|grep -F 0x000000 | awk '{print $2":"$3":"$7}'
2- to delete an ID with the above condition do: ipcrm -m ID