topic Re: Error Changing IP address using DHCP in Operating System - HP-UX

Error Changing IP address using DHCP

Juan de Los Palotes — Thu, 17 Feb 2005 13:22:09 GMT

Hi everyone

I'm trying to change the IP address of my rx2600 by sam, but I have this error

/usr/sbin/hpintl100_init script failed
ERROR: lan0 interface | PPA 0 : error: expected primitive 0x06, got DL_ERROR_ACK | |-|
dl_error_primitive = 0x33
dl_errno = 0x04
dl_unix_errno = 57
change_phys_addr: unable to change physical address
Old Station Address = 0x00306e3997cb

I checked /etc/rc.config.d/hpintl100conf and the MAC field is null, also I checked the state of this lan card by ioscan and is CLAIMED.

Any idea about this problem...

Thanks in advance.
Carlos

Re: Error Changing IP address using DHCP

RAC_1 — Thu, 17 Feb 2005 13:58:37 GMT

The error as follows.

#define ENOLINK 57 /* the link has been severed */

Disable the dhcp and modify the script in /etc/rc.config.d/netconf to make changes. Try starting network.

Re: Error Changing IP address using DHCP

Juan de Los Palotes — Thu, 17 Feb 2005 14:18:57 GMT

Thanks four your response RAC

I disable de DCHP using sam, and make the change in /etc/rc.config.d/netconf on the interface, after that I reeboot the server but the IP doesnÂ´t change. Any ideas

Re: Error Changing IP address using DHCP

RAC_1 — Thu, 17 Feb 2005 14:23:07 GMT

/etc/set_params ip_address
Also look at /etc/hosts file. Also are there any typo errors in netconf file??

Also look at drive file and leave the addresse filed blank.

Anil

Re: Error Changing IP address using DHCP

Juan de Los Palotes — Thu, 17 Feb 2005 14:46:53 GMT

HI RAC

I find the problem... I refill the file /etc/rc.config.d/hpintl100conf with the correspond configuration information of the lan interface.

Thanks anyway for your help!!!

Re: Error Changing IP address using DHCP

Juan de Los Palotes — Thu, 17 Feb 2005 14:47:32 GMT

See the last messages