topic Re: Term=unknow in Operating System - HP-UX

Term=unknow

Sp4admin — Wed, 30 Mar 2005 16:58:01 GMT

Where do I sent the term type in the mplogin prompt after I do a cntl B? Also when the system reboots it go right to the mp login promp. I have to do a login as "admin" then do a co for console.

Re: Term=unknow

Jdamian — Thu, 31 Mar 2005 02:01:41 GMT

CA command.

Read help displayed by HE command.

Re: Term=unknow

Peter Godron — Thu, 31 Mar 2005 02:06:21 GMT

Hi,
assuming that by mplogin you refer to the GSP: Have you tried the ca command?

This previous thread may help:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=808692
Regards

Re: Term=unknow

Peter Godron — Mon, 04 Apr 2005 01:57:51 GMT

Nyland,
did these answers help?
If the problem is resolved,please read:
http://forums1.itrc.hp.com/service/forums/helptips.do?#34 and close the thread, otherwise please update.
Thanks

Re: Term=unknow

Sp4admin — Mon, 05 Dec 2005 09:31:30 GMT

Thanks got it...