topic Re: Disabling EMS for LUNs in an EVA in Operating System - HP-UX

Disabling EMS for LUNs in an EVA

Andre Stewart — Thu, 30 Jun 2005 14:04:53 GMT

In the release notes for SecurePath 3.0E, on page 15, it states:

"Disable the Event Monitoring Service (EMS) for all of the devices/LUNs in an EVA."

How does one go about this? I would assume it involves adding entries to the /var/stm/data/tools/monitor/disabled_instances file, but I can't find any information to confirm that assumption.

Would I add something like:
/storage/events/disks/default/255_255_* to the file?

Andre Stewart

Re: Disabling EMS for LUNs in an EVA

Kent Ostby — Thu, 30 Jun 2005 14:31:10 GMT

Run this program and it should be able to help you out:

/etc/opt/resmon/lbin/monconfig

Re: Disabling EMS for LUNs in an EVA

Andre Stewart — Thu, 30 Jun 2005 14:35:23 GMT

Okay, I've run that program many times, but there are not hints as to whether or not specifying the hardware paths I mentioned above is the proper thing to do in order to support SecurePath. Could you give me some more details?

Andre Stewart

Re: Disabling EMS for LUNs in an EVA

RAC_1 — Thu, 30 Jun 2005 15:16:08 GMT

Andre,

1. STOP diagnostice.

2. You will have to add all those disks in disabled_instances file as follows.
/storage/events/disks/default/0_4_0_0.3.11.0.0.0.2

Add all disks for which you do not want EMS monitoring.

3. Once added, do monconfig and enable monitoring.

Re: Disabling EMS for LUNs in an EVA

Andrew Merritt_2 — Fri, 01 Jul 2005 05:11:13 GMT

Andre,

What version of the OnlineDiags do you have? I'm not sure this should be necessary with a recent version.

If you run 'cstm' that will show the version number.

When you run 'monconfig' and 'Check', do you see the entries listed for the EVA LUNs?

Andrew

Re: Disabling EMS for LUNs in an EVA

Andre Stewart — Fri, 01 Jul 2005 15:12:20 GMT

1.) Thanks for the procedure. The statement in step two was what I was looking for. I wasn't sure if I could use the regex wildcard "*". It's implied on page 16 of the SecurePath 3.0E Release Notes, but I wasn't sure.

2.) cstm outputs:

Support Tools Manager

Version A.47.05

Product Number B4708AA

Re: Disabling EMS for LUNs in an EVA

Mahesh Kumar Malik — Sun, 03 Jul 2005 03:08:31 GMT

Hi Andre

Run the following command to make changes in EMS:

#/etc/opt/resmon/lbin/monconfig

Regards
Mahesh

Re: Disabling EMS for LUNs in an EVA

Andrew Merritt_2 — Mon, 04 Jul 2005 03:17:58 GMT

> I wasn't sure if I could use the regex wildcard "*". It's implied on page 16 of the SecurePath 3.0E Release Notes, but I wasn't sure.

> Would I add something like:
/storage/events/disks/default/255_255_* to the file?

Yes, wildcards are supported in the disabled_instances file, so that example should work.

Also, I believe the problem with SecurePath that the use of disabled_instances is meant to work-around was meant to have been fixed in version 3.0C of SecurePath, so the documentation in 3.0E may not be up-to-date.

Have you actually seen any problems with SecurePath, or are you just following the instructions?

Andrew

Re: Disabling EMS for LUNs in an EVA

Andre Stewart — Tue, 05 Jul 2005 11:39:12 GMT

Just following instructions. We recently installed it and I was trying to avoid any unnecessary notifications/ISEE tickets.

Andre Stewart

Re: Disabling EMS for LUNs in an EVA

Andre Stewart — Mon, 30 Mar 2009 18:51:38 GMT

So, basically the soultions are:

1.) Do nothing, it is unnecessary with versions of SecurePath newer than 3.0C

2.) Wildcards are valid, if you need to use them.