topic Re: Secure Path Upgrade in Operating System - HP-UX

Secure Path Upgrade

Greg Hall — Wed, 24 Aug 2005 20:17:13 GMT

Hi,

HPUX 11.11. Secure Path 3.0E. EVA 5000.

I will be upgrading to Secure Path 3.0F shortly. Are there any known problems? Will the LUN device names change? I have read the rel notes and install manual and they seem to be ambiguous on this point.

I will also be doing this on other systems from Sec Pth 3.0C. Any difference ?

thanks, greg

Re: Secure Path Upgrade

Ranjith_5 — Wed, 24 Aug 2005 22:12:03 GMT

It was fine with my case..there were no problems as such.

Regards,
Syam

Re: Secure Path Upgrade

Nguyen Anh Tien — Wed, 24 Aug 2005 22:20:40 GMT

Recommend: check and install all required patches for Secure Path 3.0F . IT will be ok

Re: Secure Path Upgrade

Greg Hall — Wed, 24 Aug 2005 22:23:36 GMT

Thanks people, thats encouraging. I have all the required patches and will be applying them first.

cheers, Greg

Re: Secure Path Upgrade

Cem Tugrul — Thu, 25 Aug 2005 00:27:49 GMT

Greg,
As Syam&Tien mentioned normally no faced
problems so just take care on required patches.

Good Luck,

Re: Secure Path Upgrade

Cem Tugrul — Thu, 25 Aug 2005 01:08:04 GMT

The link as below not directly concern with you but it may gives you how important required patches for you hp-box while installing&upgrading Secure Path...

Good Luck,

Re: Secure Path Upgrade

Cem Tugrul — Thu, 25 Aug 2005 01:11:34 GMT

oppss..here is the link;

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=757861

Re: Secure Path Upgrade

Greg Hall — Thu, 25 Aug 2005 19:19:43 GMT

thanks,

upgarde went smoothly. Except for stupid san switch failing at the time. See new thread opened today :)

Greg