topic Re: Secure Path shows failed paths in Operating System - HP-UX

Secure Path shows failed paths

Greg Hall — Thu, 25 Aug 2005 19:14:39 GMT

Hi,

we had a SAN switch die last night and required a reboot. All HPUX systems recovered their paths ok, except the production server.
This is still showing FAILED paths:
TGT/LUN Device WWLUN_ID H/W_Path #_Paths
0/ 0 c21t0d0 6005-08B4-0001-28E1-0001-2000-0008-0000 4
255/255/1/0.0
Controller Path_Instance HBA Preferred? Path_Status
P5849D5AAPE04P YES
c35t0d1 fcd1 no Standby
c29t0d1 fcd2 no ****FAILED

Controller Path_Instance HBA Preferred? Path_Status
P5849D5AAPE03D no
c37t0d1 fcd1 no Active
c27t0d1 fcd2 no ****FAILED

the san switch is now ok, how do I recover these paths?

thansk, greg

Re: Secure Path shows failed paths

Cem Tugrul — Fri, 26 Aug 2005 01:10:12 GMT

Greg,

Did you well do (patch management) your prod server through the secure path?
it seems still there is missing patches for
secure path software?

Re: Secure Path shows failed paths

Cem Tugrul — Fri, 26 Aug 2005 01:12:34 GMT

Could you please check these properties also?

Load Balance: On Auto-restore: On Balance Policy: Round Robin

Re: Secure Path shows failed paths

Greg Hall — Wed, 21 Sep 2005 20:00:29 GMT

Tried various SP commands etc including turnign on load balancing. Nothing worked. System reboot fixed the problem