topic Re: swremove removes only files? in Operating System - HP-UX

swremove removes only files?

Binu George — Wed, 14 Sep 2005 04:45:04 GMT

Hi,

Does swremove only remove "files" that belong to the depot being removed and not directories?
If yes, then is there any way to remove the directories as well?

-Binu

Re: swremove removes only files?

Marcel Boogert_1 — Wed, 14 Sep 2005 04:50:57 GMT

Hi there,

swremove removes all items including directories.

Regards, MB.

Re: swremove removes only files?

Arunvijai_4 — Wed, 14 Sep 2005 04:54:16 GMT

It depends on how the preremove, postremove and unconfigure scripts are written. If a product uses any configuration files of its own, mostly swremove wont remove dir it belongs to.

-Arun

Re: swremove removes only files?

Bharat Katkar — Wed, 14 Sep 2005 05:00:51 GMT

Hi binu,
If you are very sure that the direcory belong to that package itlsef then you can remove it manually.

rm -r

swinstall many times won't remove directories.

Regards,

Re: swremove removes only files?

morganelan — Wed, 14 Sep 2005 05:00:58 GMT

The swremove command removes software_selections from target_selections (e.g. root filesystems). When removing installed software, swremove also unconfigures the software before it is removed. The software is not unconfigured when removed from an alternate root directory since it was not configured during installation. When removing available software (within a depot), swremove also does not perform the unconfiguration task.

Note: Selecting a bundle for removal does not always remove all filesets in that bundle. If a particular fileset is required by another bundle, that fileset will not be removed. For example, if the bundles Pascal and FORTRAN both use the fileset Debugger.Run and you try to remove FORTRAN , the fileset Debugger.Run will not be removed because it is also used by the bundle Pascal. This is done to prevent the removal of one bundle from inadvertently causing the removal of filesets needed by another bundle

Re: swremove removes only files?

Muthukumar_5 — Wed, 14 Sep 2005 05:20:59 GMT

Based upon Software Distributor Package scripts preremove and postremove, swremove removes file and directories. Generally few directories are exisiting the machine with few files for upgradation same software package. Some of the products will leave message that please remove directory manually if you don't want for upgradation.

rm -rf

Example Packages: Netscape Directory Service, Legato Networker

If you don't want to use that specific s/w for future upgradation then remove directory.

hth.

Re: swremove removes only files?

Leif Halvarsson_2 — Wed, 14 Sep 2005 05:34:59 GMT

Hi,
Complete removing or not, depecds on the software packet.

For example, if removing Data Protector, the configuration directorys /etc/opt/omni and database directorys /var/opt/omni/db40 is left untouched.

Re: swremove removes only files?

Binu George — Fri, 16 Sep 2005 04:34:45 GMT

Hi,

Thank you for all the responses.
I have a couple of products, which when swremoved, donot remove any of the directories. Only the files are removed.
Is this behaviour to be taken care of by using control scripts during packaging of the product?

Thanks,
Binu

Re: swremove removes only files?

Arunvijai_4 — Fri, 16 Sep 2005 04:36:28 GMT

Yes binu, you are correct. Behaviour of swremove is totally defined in the control scripts. You can remove those directories, before doing that, take a look at the contents (files) inside.

-Arun

Re: swremove removes only files?

Giri Sekar. — Fri, 16 Sep 2005 07:05:00 GMT

Hi:

If you want to know exactly what Directories/files that particular product/fileset writes to you can do a tar xvf on the swpackaged file (which was swinstalled). That way you would know exactly what you remove and you would also get a chance to see the preremove, checkremove and postremove files (which control what would be removed from swremove)

Thanks

Giri Sekar.

Re: swremove removes only files?

Binu George — Fri, 16 Sep 2005 07:07:17 GMT

Thanks Arun.
This means to say, when packaging a product, I should take care to have a postremove script that takes care of removing the directories that the product gets installed into. Am I correct?

Thanks,
Binu

Re: swremove removes only files?

Binu George — Thu, 22 Sep 2005 04:15:20 GMT

Arun has provided me with the answer to my query.

Thanks,
Binu