topic Re: OTS and FTAM Installation process in Operating System - HP-UX

OTS and FTAM Installation process

rana786 — Thu, 29 Sep 2005 23:41:14 GMT

Hi all,

I need to install OTS and FTAM in 2-cluster(RAC) node. Please confirm me that after installation whether the system will be rebooted or not. If it is rebooted then do I need to stop Database, gsd, and cluster?

Best regards,
Mostafa

Re: OTS and FTAM Installation process

Rajesh SB — Thu, 29 Sep 2005 23:56:01 GMT

Hi Mostafa,

If you are going to install OTS (OSI Transort Service) and FTAM, system needs to rebuild its kernel to enable kernel modules. Surely it needs reboot.

Better take a down time, stop all the applications gracefully and proceed further.

Regards,
Rajesh

Re: OTS and FTAM Installation process

Arunvijai_4 — Fri, 30 Sep 2005 00:00:54 GMT

Hi Mostafa,

Yes, You need to reboot your server to configure OTS and FTAM. Before rebooting, you may need to stop all the services.

-Arun

Re: OTS and FTAM Installation process

rana786 — Fri, 30 Sep 2005 00:07:24 GMT

Hi Rajesh,

Thanks a lot. One more guery, before going to install these 2-s/w do I need any utility to configure first? or I can install it straightway and configure later. Please help.

Best regards,
Mostafa

Re: OTS and FTAM Installation process

Arunvijai_4 — Fri, 30 Sep 2005 00:17:23 GMT

Have a look at these docs for more information.

OTS/9000 (OSI Transport Services):
Admin Guide
http://docs.hp.com/hpux/pdf/32070-90030.pdf
Troubleshooting OTS
http://docs.hp.com/hpux/pdf/32070-90031.pdf

HP-UX FTAM:
Install and Admin:
http://docs.hp.com/hpux/pdf/B1033-90034.pdf
Ref:
http://docs.hp.com/hpux/pdf/B1033-90004.pdf
Users:
http://docs.hp.com/hpux/pdf/B1033-90024.pdf

-Arun

Re: OTS and FTAM Installation process

Rajesh SB — Fri, 30 Sep 2005 01:48:44 GMT

Hi Mustafa,

Normally, first you used to install first and configuration part next.
For below version OTS configuration is required reboot again for effect.

32070B C.09.01 OSI Trnspt and Srvcs for 9000/800

Cheers,
Rajesh

Re: OTS and FTAM Installation process

Rajesh SB — Fri, 30 Sep 2005 04:31:27 GMT

Just additional info on installation sequence.

1st Install FTAM, it also required reboot.
2nd Install OTS asks for reboot.
3rd Configure FTAM no reboot.
4th COnfigure OTS old version needs reboot.
Latest OTS version updates dynamically.

Regards,
Rajesh

Re: OTS and FTAM Installation process

rana786 — Fri, 30 Sep 2005 22:19:06 GMT

Its ok.