topic Re: printers in Operating System - HP-UX

printers

hari_19 — Sat, 22 Oct 2005 21:39:40 GMT

Hi All,

Can anyone tell me the steps to configure printers(remote and network printers) in a K-class server, using hpdps and dce environment.

thanks in advance

Re: printers

B. Hulst — Sun, 23 Oct 2005 12:41:07 GMT

Hi,

Install them with SAM.

# sam

Regards,
Bob

Re: printers

Ranjith_5 — Sun, 23 Oct 2005 12:58:04 GMT

Hi Hari,

See the folowing online DOC from HP.

http://docs.hp.com/en/B2355-90672/ch10.html

For HPDPS see the following online doc from HP.

http://docs.hp.com/en/B2355-90678/index.html

Regards,
Syam

Re: printers

G. Vrijhoeven — Sun, 23 Oct 2005 14:19:50 GMT

Hi Hari,

HPDPS:
http://docs.hp.com/en/B2355-90156/ch03s02.html

I know you did not ask for this but,you can also go for CUPS:

http://hpux.connect.org.uk/hppd/hpux/Sysadmin/cups-1.0.2/

HTH,

Gideon

Re: printers

hari_19 — Sun, 23 Oct 2005 23:16:13 GMT

hi all,

thanks for your reply, i have gone through all these things before, i got the got concept of the hpdps but what i didn't understood is the steps on how to configure, which is not there in these pdf's, so can anyone give only steps so that i can complete the required things

with regards

Re: printers

Joseph Loo — Mon, 24 Oct 2005 00:41:21 GMT

hi,

is this what u r looking for:

http://docs.hp.com/en/B2355-90113/ch06s08.html

regards.

Re: printers

hari_19 — Mon, 24 Oct 2005 02:46:58 GMT

Hi Joseph,

before executing the pdcreate command, do we need to setup print spooler or it will create with this.

And if i install printers using hpdps can i take backup and restore the same in other server, if we can then how do i do that

thanks

Re: printers

hari_19 — Sun, 30 Oct 2005 05:58:00 GMT

thanks for the reply