topic Re: cstm - SwitchLog - curent log file does not exist in Operating System - HP-UX

cstm - SwitchLog - curent log file does not exist

Ratzie — Wed, 02 Nov 2005 17:15:52 GMT

We had a bunch of errors from a drive that failed awhile back and when I do a rs (raw summury) it still listed to i/o errors from the drive.

I wanted to start clean so I did a SwitchLog
Which I assumed would switch to a new raw log.

Now when I run raw summary I get:
Logtool Utility>rs
-- Logtool Utility INFORMATION --
A current raw log file does not exist to use as the default selected file.
You must select an existing file using either Select Raw or Select Formatted
as appropriate from the File menu.

Will a new raw file be created if an error happens.

I can view the old by:
sr
Then list the old raw file
log4.raw

What I was thinking is that a new log5.raw should have been created.

Am I missing something...

Re: cstm - SwitchLog - curent log file does not exist

Ermin Borovac — Thu, 03 Nov 2005 00:38:43 GMT

I believe that new current file (/var/stm/logs/os/log#.raw.cur) will be created as needed. As far as I can see SwitchLog only moves current file away (you could have done the same thing with mv); it doesn't initialise or start new current file.

Re: cstm - SwitchLog - curent log file does not exist

Andrew Merritt_2 — Thu, 03 Nov 2005 05:24:44 GMT

Ermin is right, the switchlog just backs up the old log. A new raw log is created the next time an entry needs to be written.

Andrew

Re: cstm - SwitchLog - curent log file does not exist

Ratzie — Fri, 04 Nov 2005 12:32:22 GMT

Thanks guys