topic Re: Failover Setting For EVA5000 HP 11.23 and ORacle in Operating System - HP-UX

Failover Setting For EVA5000 HP 11.23 and ORacle

Basheer_2 — Tue, 21 Feb 2006 11:07:16 GMT

Hello Good Morning
1) EVA 5000, Firmware 3020
2) HPUX 11.11 and 11.23
3) Secure Path 3.0E and 3.0F
4) Oracle11i ONLY

failover/failback
setting of either:

No preference
Path A-Failover only
Path A-Failover/failback
Path B-Failover only
Path B-Failover/failback

What is the recommended setting
What else Needs to be set.

Re: Failover Setting For EVA5000 HP 11.23 and ORacle

Uwe Zessin — Tue, 21 Feb 2006 11:42:22 GMT

According to the VCS 3.020 release notes from August 2004, "No preference", "Path A/B-Failover only" are allowed.

Make sure the Host's "OS Type" is set to HP-UX.

Please note that support for VCS V3.020 has ended 31 January 2006.

Re: Failover Setting For EVA5000 HP 11.23 and ORacle

Basheer_2 — Tue, 21 Feb 2006 12:53:29 GMT

Thanks UWE

Where is the Release Notes Located that states this. Any Links

Re: Failover Setting For EVA5000 HP 11.23 and ORacle

Uwe Zessin — Tue, 21 Feb 2006 13:10:24 GMT

Hello Basheer,
it looks like the document is no longer online :-(
As it is quite small, I'll attach it.

The end of support statement is hidden here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00586983

Re: Failover Setting For EVA5000 HP 11.23 and ORacle

Basheer_2 — Tue, 21 Feb 2006 13:17:20 GMT

Thanks Uwe