topic Re: timezone parameter in Operating System - HP-UX

timezone parameter

A.K. — Tue, 18 Dec 2001 18:01:07 GMT

I got two sites one in New York and the other in Vienna.
What is the value of the parameter-timezone for this locations ?

Re: timezone parameter

Helen French — Tue, 18 Dec 2001 18:12:38 GMT

hey,

TZ=EST5EDT - for New York

Shiju

Re: timezone parameter

Jeff Machols — Tue, 18 Dec 2001 18:12:49 GMT

List of all zones are in /usr/lib/tztab

Re: timezone parameter

Sridhar Bhaskarla — Tue, 18 Dec 2001 18:19:14 GMT

Newyork is in Eastern standard Timezone. So you should be setting your /etc/TIMEZONE to EST5EDT

For vienna, Virginia again it is the same Estern. So, set the samething as the above.

-Sri

Re: timezone parameter

John Bolene — Tue, 18 Dec 2001 19:22:10 GMT

Vienna, Austria would be CET-1CEST

Re: timezone parameter

A.K. — Tue, 18 Dec 2001 19:46:43 GMT

hi guys,
Maybe there is a misunderstanding
I talking about the timezone-parameter
that can been view in /stand/system
or configured or view in SAM
=>kernel configuration
=> configurable parameter
there the value is in minutes (0 => 1440)
My real problem is Vienna(Austria)
What is the timezone I should set in Vienna
If my New York is 300(300/60 => 5 hours)
So What spose to be Vienna timezone
so they would be synchronize
I spose to go west to greenwich time ?

Re: timezone parameter

Bill Hassell — Tue, 18 Dec 2001 19:54:31 GMT

The kernel parameter "timezone" is always minutes west (a positive integer). Since 24 hours would be 1440, 1 hour east of Greenwich would be 1380.

Note that timezone is used only by processes that do not inherit TZ in their environment.

Re: timezone parameter

Sanjay_6 — Tue, 18 Dec 2001 22:11:19 GMT

Hi Amir,

Try this link,

http://us-support3.external.hp.com/cki/bin/doc.pl/sid=8aa9c4391aa4cf319d/screen=ckiDisplayDocument?docId=200000055184936

Hope this helps.

Regds