topic Re: submask in Operating System - HP-UX

submask

Michael_33 — Wed, 19 Dec 2001 06:56:53 GMT

Hi all,

Which command can show submask directly?
I want ip format not hex.

Thanks!

Re: submask

Kurt Beyers. — Wed, 19 Dec 2001 07:23:10 GMT

The fastest way remains ifconfig lan0, but this gives the subnet in hexadecimal (it's not such a big deal to calculate it into decimal ff=255)

Via SAM-Networkong and Communications-Network Interface Cards, you can retrieve the subnet mask in decimal format. I didn't find the equivalent command from the prompt (if it exists).

Kurt

Re: submask

Steven Sim Kok Leong — Wed, 19 Dec 2001 07:28:41 GMT

Hi,

Execute this will show you the lan interface, IP address, interface status and netmask in decimal mode that you wanted.

# /usr/sam/lbin/laninfo 2>/dev/null |awk '{print $8, $9, $10, $11}'

Hope this helps. Regards.

Steven Sim Kok Leong
Brainbench MVP for Unix Admin
http://www.brainbench.com

Re: submask

Michael_33 — Wed, 19 Dec 2001 07:28:52 GMT

thanks Kurt!

Re: submask

Hartmut Lang — Wed, 19 Dec 2001 07:32:30 GMT

netstat -rv -n

Hartmut

Re: submask

Michael_33 — Wed, 19 Dec 2001 07:33:52 GMT

Great! :)

Re: submask

Thierry Poels_1 — Wed, 19 Dec 2001 09:09:39 GMT

Hi,

yet another option:
grep SUBNET_MASK /etc/rc.config.d/netconf

regards,
Thierry.

Re: submask

Thierry Poels_1 — Fri, 28 Dec 2001 14:08:20 GMT

hi again,

yet one more:
/usr/sam/lbin/laninfo

happy newyear
Thierry.