topic mstm in Operating System - HP-UX

mstm

Wang,MinJie — Sun, 12 Mar 2006 22:05:46 GMT

Hey everyone
I have some questions about mstm:
What can mstm do to hardware
How can I diagnose a suspect part in my system
please tell me the procedure with details
My version number is A.38.00
Thank you guys!

Re: mstm

Sameer_Nirmal — Sun, 12 Mar 2006 22:44:57 GMT

Hi,

MSTM is a Menu mode of the Support Tool Manager (STM) besides other modes as CSTM and XSTM.

With STM , you can run
1. Information Tool ( one of the menu options) to get hardware details of the system , its installed components. With this it gives you insight of hardware of the system.

2. Logtool allows you to extract hardware logs/errors reported by various supported hardware components inside the server.

3. Diagnostics Tool allows you to run diagnostics on supported hardware to verify their funcationalities.

4. Excercise supported components of the server to ascertain their hardware status.

Refer following link for more information.
It is always recommended to have latest version of STM installed on the server.
I guess current version is A.49.15 for 11.11

http://docs.hp.com/en/diag/st/st_prod.htm
http://docs.hp.com/en/diag/st/st_new.htm

Re: mstm

Sameer_Nirmal — Sun, 12 Mar 2006 22:48:47 GMT

Hi again,

Wanted to add this as well.

There is a dependancy between server firmware and STM in a server. Hence it is always recommended to have latest firmare installed as well alongwith latest STM.

Re: mstm

Sivakumar TS — Mon, 13 Mar 2006 01:15:16 GMT

Hi Wang,

I have attached a txt file with the procedure, in which we are verifying a new SCSI disk using the menu-driven user interface (mstm).

Hope this is usefult for you.

Regards,

Siva.

Re: mstm

Andrew Merritt_2 — Mon, 13 Mar 2006 06:41:28 GMT

Hi,
http://www.docs.hp.com/en/diag/stm/stm_upd.htm#table shows the supported version of OnlineDiags. If you've currently got A.38.00, you'll need to update to either A.44.00 (if you have HP-UX 11.00) or A.49.10 (if you've got HP-UX 11.11).

After upgrading, you should also install the latest patch for the corresponding version. The latest patch for A.44.00 (HP-UX 11.00) is PHSS_34286, for A.49.10 (HP-UX 11.11) is PHSS_34166

If you don't have the Support Tools disks, you can download from
http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

or go to http://www.software.hp.com and then type "B6191AAE" in the search box.

http://docs.hp.com/en/diag/stm/stm_ptch.htm should show the latest patches (although it is currently a little behind).

Andrew

Re: mstm

Wang,MinJie — Tue, 14 Mar 2006 11:01:59 GMT

Now I know why sometimes when I highlighted a hardware and pressed "Run",there was no reaction(for some hardwares can't be run,they are not supported).
Thank you!