topic Re: Booting from remote CD in Operating System - HP-UX

Booting from remote CD

Eugene Klaus — Thu, 16 Mar 2006 07:47:52 GMT

I have two N4000 systems which were originally set up to boot from a network drive. There are no CD readers attached to these systems and for security reasons the drives installed in these servers were washed.
Is there a procedure by which I can boot an install cd remotely exported from another server?

Re: Booting from remote CD

Torsten. — Thu, 16 Mar 2006 07:55:27 GMT

Not directly.

You'll need an ignite server providing the software depots or an golden image.
Have a look at the ignite-ux manual.

Re: Booting from remote CD

Peter Godron — Thu, 16 Mar 2006 07:56:48 GMT

Eugene,
have a look at this thread:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=990267

Seems you have to go down the ignite route.
Can you not attach a external CD for installation only, diconnected from any network.

Re: Booting from remote CD

Pete Randall — Thu, 16 Mar 2006 08:01:42 GMT

Another alternative would be a standalone CD/DVD drive that you could attach to either of the systems.

Pete

Re: Booting from remote CD

Eugene Klaus — Thu, 16 Mar 2006 08:02:09 GMT

As to the attachement of a external CD, yes I can do that. I was just lazy and thought I might find a magic wand laying around to work with in this case.

I think that attaching the external CD is the least problematic action to take.

Thanks for the pull back to reallity.

Re: Booting from remote CD

Eugene Klaus — Thu, 16 Mar 2006 08:04:09 GMT

Thank you all for your thoughts and recomendations.